Bios Mods -The Best BIOS Update and Modification Source

Ok , try different version of the phlash.exe and make sure to use the parameters i have mentioned in the thread about flashing the modified bios .
I will wait your reply .

Ok . i tried with winsplash (from orginal BIOS package) and now i got error (from PHLASH.LOG) :


Check if BCPSYS segments are different
Failed: 51 bytes BCPSYS are the same

Error code : -110(0xFFFFFF92)
Description:
The new BIOS image is the same as current system BIOS, so the BIOS will not be changed.
Error code: -110

Cleanup stage
Stage completed
--- Log stopped: 01/06/12 11:08:56

this error i got with R0080J4.wph image. is there any way to flash same bios or to disable version check ?

Hi Ahmed

just to inform you that R0104J4 works OK . i have intel tab and ahci (and other) options inside . tnx !!!!!

Nice to hear that
what about the other R0080J4 !
it has the same structure in menus and the same options but you just can`t flash the same or older bioses

---

Thanks for confirming,



Moved to unlocked /mod

(01-06-2012, 10:13 AM)AHMED HOSSAM Wrote: [ -> ]Nice to hear that
what about the other R0080J4 !
it has the same structure in menus and the same options but you just can`t flash the same or older bioses

---

Thanks for confirming,



Moved to unlocked /mod

same .. in my vaio orginal bios is R0080J4 and i can't flash same version .. only newer (maybe older of R0080J4 if exist). this link show that i possible to roll-back to R0080J4..

http://support.vaio.sony.eu/computing/va...0080J4.htm

anyway now i have AHCI and other options and everithing runs fine

tnx !!

Hi,

I tried to flash R0104J4_SLIC.wph with WinPhlash64, but keep on getting the following error:


Looking for interface descriptors and code...
cbSearch= 4096 (0x00001000)
Failed: no signature found in the file

Error code : -103(0xFFFFFF99)
Description:
Platform Signature not found in the interface.
Error code: -103


Any idea how to solve this problem? I have a Sony VAIO VGN-C2Z/B and my current BIOS version is R0104J4 (unmodded). I tried several 32-bit versions of WinPhlash, but they can't load PhlashNT.sys in the first place (Windows 7 64-bit).

Thanks.

Okay, I used UBCD4Win to run WinPhlash32 and it worked. Thanks for the mod, can now use AHCI with my new SSD.

R0104J4 works fine for AHCI

just a quick note,

R0104J4 worked for a Vaio VGN-C250N also.

thx!

Hi there,
I came here because I recently "revived" my Sony C2Z/B by adding an SSD and installing Windows 8.1 pro 64 bit on it. It works great, but I'm looking for a way to install 4Gb of RAM instead of the claimed maximum of 2Gb. It seems that this 945PM chipset supports up to 4Gb but Sony sets the limit to 2Gb for some reason. Would it be possible maybe with a modded BIOS to expand the memory to 4GB?
Thanks for your thoughts...
Happy newyear!