(09-04-2014, 03:11 PM)Ra2o2 Wrote: [ -> ] (09-04-2014, 02:56 PM)BDMaster Wrote: [ -> ] (09-04-2014, 01:44 PM)Ra2o2 Wrote: [ -> ] (09-04-2014, 10:08 AM)BDMaster Wrote: [ -> ]Ok friend,
I will try to replace old PCI/VEN ID with this new into your Backup, so We will try this
new way.
Regrads
If you are ready I will try it
regards
Ok friend,
try this one, if It will fail then I will prepare a second one where I will use all Whitelist records writing into the same ID Card (new one) and We will see where is the issue.
http://rghost.net/57853392
Let me know
Regards
P.S. I wrote this data 8087:07DC:0001 0000 Blutooth into WiFi Card Slot
Still the same error about 8087/07DC 
is there a chance to disable the Bluetooth funktion on this card??
8087:07DC:0001 0000
------------------^---- why this "1" ??
It's a SubClass parameter !
Now I will try to do the second test !
New Mod replacing IDs into Withelist records (Slots).
Try this one I fulled all slots with the same ID in different forms :
http://rghost.net/57854194
Let me know
Regards
-----------
Sorry but still the same.
Ok friend,
I asked help to Serg008 a very experienced Bios Modder (The Bigger on MDL)
and He replied to me about this Mod, so here there are two files.
1. based on FPT backup
http://rghost.net/57858147
2. based on PRG backup
http://rghost.net/57858157
Both are done using Serg008 Patch on Whitelist Module, I am sure this time will work, so try and Let me know.
Regards
(09-05-2014, 04:20 AM)BDMaster Wrote: [ -> ]Ok friend,
I asked help to Serg008 a very experienced Bios Modder (The Bigger on MDL)
and He replied to me about this Mod, so here there are two files.
1. based on FPT backup http://rghost.net/57858147
2. based on PRG backup http://rghost.net/57858157
Both are done using Serg008 Patch on Whitelist Module, I am sure this time will work, so try and Let me know.
Regards
Yes, it works, no problems anymore.
(just to Bluetooth devices at one time who are fighting
)
I used the second one based of the Hardware Programmer.
Is it possible to programm the first one with FPT and without a Hardware Programmer? because it is as big as my FPT backup.
Or is it the same mod and just has to be cut to fit??
Did Serg008 explain what he did ?
Is the WhiteList deaktivatet or did he add the device to it??
Do you want to try anything else because my Bios chip isn't solderedd yet??
Ok friend,
Thanks to Serg008 forever !!!
It's not possible to use FPT to reflash Bios Mod as your Eeprom is Write Protected
and Prr.exe ore Prr2.exe cannot bypass the Protection, so only an SPIPGM can write It like You have done.
I suggest if there is space enogh to solder the chip on a socket adapter and connect it to your soldered wires by jumpers . . . then use some tape to fix it.
Look here :
http://www.futurlec.com/SMD_Adapters.shtml
About the explaination I will post a detailed comment to the patch code.
Regards
(09-05-2014, 09:48 AM)BDMaster Wrote: [ -> ]Ok friend,
Thanks to Serg008 forever !!!
It's not possible to use FPT to reflash Bios Mod as your Eeprom is Write Protected
and Prr.exe ore Prr2.exe cannot bypass the Protection, so only an SPIPGM can write It like You have done.
I suggest if there is space enogh to solder the chip on a socket adapter and connect it to your soldered wires by jumpers . . . then use some tape to fix it.
Look here :
http://www.futurlec.com/SMD_Adapters.shtml
About the explaination I will post a detailed comment to the patch code.
Regards
So finaly I solded it back (and enjoy the hi-speed Wifi).
I think theese where a great option:
http://www.samedisk.com/cht/images/cut_s...so8_01.jpg
http://www.samedisk.com/cht/images/cut_s...so8_02.jpg
but I can't get hand of one of them.
So thank you Serg008 and BDMaster for your work and time.
(09-05-2014, 01:24 PM)Ra2o2 Wrote: [ -> ] (09-05-2014, 09:48 AM)BDMaster Wrote: [ -> ]Ok friend,
Thanks to Serg008 forever !!!
It's not possible to use FPT to reflash Bios Mod as your Eeprom is Write Protected
and Prr.exe ore Prr2.exe cannot bypass the Protection, so only an SPIPGM can write It like You have done.
I suggest if there is space enogh to solder the chip on a socket adapter and connect it to your soldered wires by jumpers . . . then use some tape to fix it.
Look here :
http://www.futurlec.com/SMD_Adapters.shtml
About the explaination I will post a detailed comment to the patch code.
Regards
So finaly I solded it back (and enjoy the hi-speed Wifi).
I think theese where a great option:
http://www.samedisk.com/cht/images/cut_s...so8_01.jpg
http://www.samedisk.com/cht/images/cut_s...so8_02.jpg
but I can't get hand of one of them.
So thank you Serg008 and BDMaster for your work and time.
Ok friend,
these are the modifies into Serg008 NWL patch :
These are modifies for Ra2o2 X230T by Serg008 REALLY Working !!! :
79E0EDD7-9D1D-4F41-AE1A-F896169E5216_2207.ROM LenovoWmaPolicyDxe.efi (X230T 2.59 - Thinkpad E430 - T430 - E530 - T530 2.59)
0B16 : 0F 84 7A 01 00 00 to 90 E9 7A 01 00 00 jz loc_C96 to nop + jmp loc_C96 ; patch1 (6): 0F 84 7A 01 00 00 to 90 E9 7A 01 00 00
0BA7 : 0F 85 8D 00 00 00 to 90 90 90 90 90 90 jnz loc_C3A to nop nop nop nop nop nop ; patch2 (6): 0F 85 8D 00 00 00 to 90 90 90 90 90 90
0BC1 : 75 77 to 75 00 jnz short loc_C3A to jnz $+2 ; patch3 (6): 75 77 to 75 00
0C38 : 74 19 to EB 19 jz short loc_C53 to jmp short loc_C53 ; patch4 (6): 74 19 to EB 19
0C4C : 74 3F to 90 90 jz short loc_C8D to nop nop ; patch5 (6): 74 3F to 90 90
0C4E : E9 38 FF FF FF to 90 90 90 90 90 jmp loc_B8B to nop nop nop nop nop ; patch6 (6): E9 38 FF FF FF to 90 90 90 90 90
I hope It will help You !!!
Regards
Questions about the firmware:
1. Is it a customized firmware per individual laptop?
2. If its not customized per individual laptop, is it a different firmware for the X230 than the X230T?
3. If I understood, the original poster flashed a firmware that skips the bios whitelist check completely. So, what is all the fuzz about changing PCI/Vendor IDs?
(09-17-2014, 01:16 AM)pekape Wrote: [ -> ]Questions about the firmware:
1. Is it a customized firmware per individual laptop?
2. If its not customized per individual laptop, is it a different firmware for the X230 than the X230T?
3. If I understood, the original poster flashed a firmware that skips the bios whitelist check completely. So, what is all the fuzz about changing PCI/Vendor IDs?
Hi friend,
I wiil reply to your questions to explain a little bit the about requests :
1. Yes !!! Bios Mod Customized as Bioses today are RSA Signed and Encapsulated !
-. only way to reflash It back is Recovery Mode or FPT Intel Tool basing on Backup
2. Bioses for different Platform are tiny different, but structure are almost the same
3. Some Intel PCI Cards have a Bios own on board (Card Firmware) that lock the -. removing whitelist, so normal unlock doesn't work !
4. About Blutooth issue is an HW issue and tapingPin #51 You can resolve It
Let me know
Regards
BDMaster,
Could you repost that link?
(08-30-2014, 12:11 PM)BDMaster Wrote: [ -> ] (08-19-2014, 10:11 AM)Ra2o2 Wrote: [ -> ]Request for a Lenovo Thinkpad X230t Tablet Whitelist remove
UEFI Bios ver. GCET99WW ( 2.59 )
Embedded Controller ver. GCHT25ww ( 1.14 )
Want to install a Intel 7260 802.11ac + Bluetooth 4.0 mini PCI-E
Yes I've read this thread:
https://www.bios-mods.com/forum/Thread-T...ware-Flash
and I'm just waiting for my Hw. programmer.
Here my BIOS backup: https://www.sendspace.com/file/32s263
thank you very much.
Hi friend,
here is your Bios Mod :
http://rghost.net/57770676
This is only 4096 KB as your backup is oversized not got by Progranner, but using software tools !
Let me know
Regards
BDmaster, do you know if this whitelist removal still works in with BIOS v2.62? I am not able to downgrade my BIOS.