Bios Mods -The Best BIOS Update and Modification Source

(05-13-2015, 01:52 PM)americabcd Wrote: [ -> ]

(05-13-2015, 01:51 PM)americabcd Wrote: [ -> ]

(05-13-2015, 01:25 PM)BDMaster Wrote: [ -> ]Use this tool run It as Admin and upload the result file here :

http://rghost.net/7xBfRPCvp

http://rghost.net/53128665

let me know
regards

P.S. After I will explain how to unlock your Menu Tabs using Flaseclock Method !

I have tried the universal bios back up but a message of 'cannot indetify bios' popped up. While when I tried the backup tool 12, the words were too small for me to identify. (However, I did notice the process was similar with the situation when I was trying to flash my bios.)

I have already used the phoneix tool to extract my bios so I can modified my vbios . If you need it, just feel free to tell me.

I have also followed Vodek's tutorial to unlock the advanced options of my bios.

Yes but there are many tests to do yet !
If You would to partecipate I am glad to make the full Unlock of your Bios !
These are Code modifies into SetupUtility Module nd SLIC 2.1 !
Regards

I wish to do so! What do you need?

This is my modified bios.

https://drive.google.com/open?id=0B9KcQW...authuser=0

This is my original bios.

https://drive.google.com/open?id=0B9KcQW...authuser=0

Ok friend,
I am doing some tests with Vodek on MDL :

http://forums.mydigitallife.info/threads...s/page1968

So I will to make the same with You !
Let me now what have You done so far . . . have You rewrite back your Bios Mod ?
I will upload quickly a Bios Mod for You to make some tests !
Many thanks for your partecipation and files . . .
Regards

This is Vodek :



0xA76A3 Suppress If:
0xA76A5 True
0xA76A7 Setting: Intel Page, Variable: 0x258
0xA76CD Option: Disabled, Value: 0x0 (default)
0xA76DB Option: Enabled, Value: 0x1
0xA76E9 End of Options
0xA76EB End If


setup_var 0x258 0x1

Yes, I have done everything mentioned above as well as in this tutorial.

https://www.bios-mods.com/forum/Thread-R...7#pid90017

Ok friend,
here is the Bios Mod Sli 2.1 + ADV (based on your Bios mod vBios) :

http://rghost.net/6w6BfyZ2h

So like I asked to Vodek I now ask to You to mke this sequence of tests . . .

Ok I suggest to flash this Bios Mod first from Windows environment then if You get error
You can flash form Dos without prr.exe and last if You cannot running It then use flash.bat !
So first open a Comand Prompt with Admin Rights (shft + right mose click = Open Comand Prompt from here)
giving this from "modified" folder, check the Administrator rights and execute this comand :

(on Windows x32)

fptw -f bios.bin -bios (HIT ENTER)

(on Windows x64)

fptw64 -f bios.bin -bios (HIT ENTER)

Check for errors !

If You get Errors then Prepare an USB Stick like into instructions (use Rufus) and copy into all files from modified
folder, go into Bios Setup and Disable Secure Boot and Set Legacy Bios USB, then Boot from USB Stick into Pure DOS.
Again try comand without prr.exe so from CLI C:\ execute this comand :

fpt -f bios.bin -bios (HIT ENTER)

If You get Errors then run flash.bat !

Let me know
Regards

Remember what has done Vodek here :


Booting from USB and run fpt.exe to flash and also run fptw64.exe from Windows command line I could not flash the BIOS Mod...
Error 28: Protected Range Registers are currently set by BIOS, preventing flash access.
Please contact the target system BIOS vendor for an option to disable Protected Range Registers.

But!
After I closed (computer will go into sleep mode) and then open (computer came from sleep mode) notebook screen - everything worked OK!

>fptw64 -f bios.bin -bios

Intel ® Flash Programming Tool. Version: 9.5.14.1724
Copyright © 2007 - 2013, Intel Corporation. All rights reserved.

Platform: Intel® HM86 Express Chipset
Reading HSFSTS register... Flash Descriptor: Valid

--- Flash Devices Found ---
W25Q64BV ID:0xEF4017 Size: 8192KB (65536Kb)

PDR Region does not exist.
GBE Region does not exist.

- Reading Flash [0x800000] 4096KB of 4096KB - 100% complete.
- Erasing Flash Block [0x689000] - 100% complete.
- Programming Flash [0x689000] 2328KB of 2328KB - 100% complete.
- Erasing Flash Block [0x6D6000] - 100% complete.
- Programming Flash [0x6D6000] 12KB of 12KB - 100% complete.
- Erasing Flash Block [0x6E5000] - 100% complete.
- Programming Flash [0x6E5000] 4KB of 4KB - 100% complete.
- Verifying Flash [0x800000] 4096KB of 4096KB - 100% complete.
RESULT: The data is identical.

FPT Operation Passed

So only at the end after doing sleep and wakeup Eeprom is become Write UnProtect !

Thank you very much!!! I successfully flashed my bios. I don't know how to thank you!