(08-29-2021, 12:01 PM)bringBDMaster Wrote: [ -> ]Ok friend, here you go , follow the instructions and choice the right bios platform for your laptop :
https://www.mediafire.com/file/tuz1ew6d5...y.rar/file
Regards
P.S. it is not unlocked version 2.17 , if do you want to unlock then write me
Thank you so much! But I'd like to downgrade to 2.09 version. I think this is the only way to bring back the sata3.
PS: sorry, my english is not so good.
thank you again.
Yessss, it worked for me! Thank you very much. I have been waiting for this time since 2017.
WOW , thanks for report !
Regards
P.S. these Recovery Bios are unlocked too
I had a problem with the recovery mode: a Sandisk Cruzer Titanium was not recognized.
When another was used it ran Bios 2.09.
As the machine already has another Wi-fi AC card with Bluetooth, it continues to work and the SATA indicates 6Gb/s.
Thanks to the whole community for the support!
(07-22-2015, 06:12 AM)shinzon Wrote: [ -> ]Well, I managed to brick the machine. I set the video ram to 384mb and the machine will no longer boot, nor can I access the recovery mode to flash back to the stock bios: while I can use fn+esc to get it into recovery mode (seemingly), it never reads the usb drive with the bios on it. I tried shorting the CMOS reset jumper, but still no luck. How a simple setting change in the BIOS can brick a machine so badly a CMOS clear won't fix it, I have no clue. Looks like I'm well and truly screwed.
Any help you could provide would be deeply appreciated.
Hello, sorry to bump up this thread, but I suffer the same problem, also same setting vram too high (I set it to 1024MB)
Now this rare spec laptop definitely unusable, I cant even load bios file thru Fn+Esc key, looks like the core bios was protected by SecureBoot that turned on by default
I do wish there's any workaround to fix this :( unfortunately there's none replacement board that have i5 3337U in here like what I have now
HI all, i'm new here, i have an acer aspire v5-171 with 2.17 modded bios and i want do downgrade to 2.09 for sata3 capability. What is the recovery procedure? I do the fn + esc thing but it just beeps 3 times and reboots without flashing anything. What can I do?