Bios Mods -The Best BIOS Update and Modification Source

The reason of your problem is incorrect value of IA32_PACKAGE_THERM_STATUS
Did you tried to downgrade version of BIOS?

No I didnt because there is no downgrade versions of this bios for this board. Any chance to correct this in this current version?

Run RWEverything again.
Press CPU MSR registers button, press User list button or F5, type a=0x1b2, press Add, press Done.
Post a screenshot with results.

I am sorry its takes 5 minutes to reboot the server. Here the results attached.

OK. Now go to Access->Command
Type a command:
cpuid 6
Post a screenshot with results.

BTW: I've found some BIOS for motherboard:
R 1.0a - https://www.supermicro.com/Bios/softfile...S7_620.zip
R 1.0b - https://www.supermicro.com/Bios/softfile...S7_923.zip
R 2.0 - https://www.supermicro.com/Bios/softfile...S7_B30.zip
R 2.0b - https://www.supermicro.com/Bios/softfile...S8_224.zip
2.1 - https://www.supermicro.com/Bios/softfile...S8_823.zip
3.1 - https://www.supermicro.com/Bios/softfile...S9_430.zip
3.2 - https://www.supermicro.com/Bios/softfile...SUM230.zip
3.3 - https://www.supermicro.com/Bios/softfile...SUM240.zip

Ok here are the results attached .

Wow thank you so much. I can try these bios now but it might break your current work. I will do it later. BTW latest bios is always better because there are many security mitigations on the new bios.

PS: I have tested the 2.1 btw. It didnt work and same problem exists

Test all previous versions. And make screenshot of CPU MSR registers and Command (with cpuid 6) with each BIOS version.

Can you boot in Linux?
I need result of spsInfoLinux64 from this package
Try run it with key -verbose

This is for bios 2.1   . I cannot install 1.0b because its giving warning on the ipmi bios update interface.

Here the spsinfo results attached.