There is a Board on the same Elitegroup p4m890t-m rev 1.0 chipset ... I want to make the Core 2 quad Q6600 (Slacr) 95w processor work on it . The processor is detected,allows you to enter the bios,but freezes at the system boot stage (black screen and flashing white cursor) ... Is it possible to fix this in a modified BIOS?
Post a screenshot of third (Mainboard) tab of CPU-Z.
Make a photo of BIOS page with CPU information with your Q6600 installed.
Post a This is how the core2duo e7500 (wolfdale) series processor is defined on this motherboard. Unfortunately, to press "Y" or "N" in the main boot screen, you need to have a PS/2 keyboard that I don't have only USBscreenshot of third
As an experiment, I filled in the P4m890T-M(v1.0) BIOS from P4m900T-M(v1.0) (like the boards are very similar, although the latter has unofficial support for Xeon/Quad) -The result : a black screen ,judging by the post card hanging on the post D1
I still need a screenshot of third (Mainboard) tab of CPU-Z.
Unfortunately ,this motherboard with this processor does not start Windows, and periodically hangs on the initialization of controllers...
You need to use supported CPU.
(09-25-2020, 09:47 AM)DeathBringer Wrote: [ -> ]Мне все еще нужен скриншот третьей вкладки (Mainboard) CPU-Z.
Done!
At first you need to update BIOS to
070808 version and check with
Q6600 and
E7500 again.
(09-26-2020, 04:31 AM)DeathBringer Wrote: [ -> ]At first you need to update BIOS to 070808 version and check with Q6600 and E7500 again.
Updated the BIOS to the latest official version. Unfortunately that didn't help either((((