Bios Mods -The Best BIOS Update and Modification Source

For Clevo BIOS Mods go here >>>PremaMod<<<

(WIP) P170HM3 +XTU = "working"








STATUS UPDATE:

Milestones:

DONE - Intel XTU support enabled
DONE - XTU 2920/2960 Extreme CPUs multi & additional Turbo voltage unlocked
DONE - XTU XMP profile support
DONE - 3D licence updated to support GTX485M & GTX580M with NVIDIA 3D VISION (usually blocked on unlicensed bios)
DONE - CPU microcode updated to - v28 (2012/04/24)
DONE - SATA RAID oROM updated to - v11.6.0.1702 (RAID TRIM SUPPORT, yet to be tested)
DONE - TDP & Turbo Time Limits customized (hard code)
DONE - T1 command rate for 4 SO-DIMMs enabled (hard code)
DONE - Customized Boot Logo
DONE - ME Firmware updated to v7.1.52.1176 (Clevo left us at 7.0.4.1197)
DONE - Boot Agent GE oROM updated to v1.3.81

NEW:

- Fixed 4 DIMM 1866Mhz+ BUG
- ME firmware, oROMS , CPU microcode updated (see above for details)
- Fixed problem of the new Kepler Cards (GTX680M, K5000M etc.) only showing a black screen after driver installation
- Kepler cards now report proper HW ID of '710x' instead of '0000'



Known BUGs: NONE

ToDo:

- Port 3D license to support new Kepler cards in 3D mode on internal screen
- Test RAID TRIM

Send me link to download that tools, and also a link to download the bios files, i'm unable to download from the links you posted before.

(09-16-2011, 05:34 AM)camiloml Wrote: [ -> ]Send me link to download that tools, and also a link to download the bios files, i'm unable to download from the links you posted before.

DONE!

EDIT: Links fixed and updated!

Received prefectly, thank you very much for the tools look great, as i told you by PM this is kinda new bioses to me the structures and so... It will take me some time updating my skills to be able to mod aptio bioses and i have not too much spare time lastly.

If any one is willing to help i can confirm the tools are genuine and work for opening and managing aptio bioses, so don't hestiate in give a hand to this project if you think you can

Would you be willing to send me a link to those tools as well? I am also trying to do this.

Many Thanks!

James

(09-23-2011, 02:09 PM)arsenix Wrote: [ -> ]Would you be willing to send me a link to those tools as well? I am also trying to do this.

Many Thanks!

James

It`s now in the first post...

Man, I was up to thinking that "this forum I signed for getting help with unlocking my BIOS to support I7 Extreme CPUs gave me ZERO help" but I found your post today where I finally downloaded Aptio MMTool which can help me with removing and adding CPU microcodes! Horray!
BTW do you know how to use CBROM tool for checking CPU support list on AWARD BIOSes? I am thinking to take CPU microcodes from my AMI efi BIOS, then send it on AWARD BIOS and then check supported CPUs using CBROM tool. At least I heard this way. If you know how to use please help me.
If you know the easiest way also please Help

Thank You for MMTOOL!

EC link updated to version 09...

Hey guys. Great forum here. If you have had success with the P170HM(3), then this should be a breeze, amirite? This is a fairly new model.

http://www.bios-mods.com/forum/Thread-RE...s-of-Tools

Hello Prema,

You can use XTU v3.0 with your P170HM3(3d-enabled) laptop. You can find the .msi setup from Intel's website.

Please note: You have to uninstall XTU 2.1 (if it is installed on your system) and reboot. And then go to Device Manager and click Show Hidden Devices on View Menu. There should be an IOCBIOS with yellow exclamation mark. You should uninstall & reboot aswell.. After this, you can install v3.0