Asrock M3A790GXH/128M SLIC 2.1

[majasi]

Motherboard : Asrock M3A790GXH/128M
Bios Version : 1.90
Bios Type : AMI
Bios Link : http://europe.asrock.com/downloadsite/bi...90)DOS.zip

Thanks in advance

[555LE]

Motherboard : Asrock M3A790GXH/128M
Bios Version : 1.90
Bios Type : AMI
Bios Link : http://europe.asrock.com/downloadsite/bi...90)DOS.zip

Thanks in advance

look here http://www.bios-mods.com/forum/Thread-As...0#pid39180

[majasi]

Motherboard : Asrock M3A790GXH/128M
Bios Version : 1.90
Bios Type : AMI
Bios Link : http://europe.asrock.com/downloadsite/bi...90)DOS.zip

Thanks in advance

look here http://www.bios-mods.com/forum/Thread-As...0#pid39180

Hi!
Thanks for your help.
I flashed the bios, but nothing changed. I still can´t activate Windows 7. I followed the instruction in this thread
http://www.bios-mods.com/forum/Thread-SL...-BIOS-1-80
It did not work either.
When I look in Slic Toolkit I get a No OEM SLP String found ! message.
I am a newbie and my english is not that good, but I hope you can help me anyway.
With hope.

[555LE]

Hi!
Thanks for your help.
I flashed the bios, but nothing changed. I still can´t activate Windows 7. I followed the instruction in this thread
http://www.bios-mods.com/forum/Thread-SL...-BIOS-1-80
It did not work either.
When I look in Slic Toolkit I get a No OEM SLP String found ! message.
I am a newbie and my english is not that good, but I hope you can help me anyway.
With hope.

you used M3A79GH_SLIC1.90.EXE

[majasi]

Yes I used M3A79GH_SLIC1.90.EXE.
Now I can see in Slic ToolKit that the Slic version has changed to AQUARIBUSIN112. It was Asus Notebook. I send you a printscreen.
I have tried to find a OEM SLP Product Key to AQUARIUS but I have not been able to find one.
Regards

[555LE]

Yes I used M3A79GH_SLIC1.90.EXE.
Now I can see in Slic ToolKit that the Slic version has changed to AQUARIBUSIN112. It was Asus Notebook. I send you a printscreen.
I have tried to find a OEM SLP Product Key to AQUARIUS but I have not been able to find one.
Regards

all is well you can take any key it is not tied to the vendor

[majasi]

I tried once again. I followed this instruction:
1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

But, after the reboot I get a This copy of Windows is not genuine message in the low right corner of the desktop and the windows is not activated.

[555LE]

I tried once again. I followed this instruction:
1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

But, after the reboot I get a This copy of Windows is not genuine message in the low right corner of the desktop and the windows is not activated.

go check at Microsoft http://windows.microsoft.com/ru-RU/windo...validation

[majasi]

It worked!!!
Thank you very much.
Regards