ECS MCP61 Bios here:

[dawoodakram2]

NEW Bios or MCP61??? ok got foxconn bios flashed good, its from foxconn for boards mcp61,lots and i mean lots of options are already unlocked, ONE problem though, i dont understand them. LOL

same options as your abit bios but with ddr2 400 and also:

VTT VOLTAGE SELECT 1.20 - 1.30V

CHIPSET V-DUAL SET
1.20 - 1.50V

VCORE VOLTAGE SELECT
FROM MINUSES TO 0.325

AND CHIPSET VCORE SELECT
1.225 - 1.375

What are these and can i overclock good with this bios???? i will attach original bios here also, has id,vid, htt, and all that also, and voltageas norm. and mem timings and stuff like abit.

[TheWiz]

OMG great work dawood! props to you. Once I get back to my workstation Ill post my response.

TheWiz

[dawoodakram2]

got my acer t180 up to 2.8ghz but unstable so backed down to 2.6ghz and ddr2800 @444 thats cpu/6, cant use new bios it works but dont understand it and scared i blow up.lol anyway please see if you can find out what are all these options??? look at foxconn website lots and lots bios there but this was best fit, so 2 speak. there is a bios out there that supports wiicked overclocking seen it in vid on youtube, trying to find it. my problem is in bios my volts only show 1.4v - not above that, need more juice, i seen a voltmod at http://ocinside.de/index_e.html look in bios i have 1.4v so i can do 1.4v to 1.5v voltmod ??? yes, sod it im going or 1.550v, will that work input in guide and see what u think please any 1. thank you

[MrTangoWhisky]

Is this BIOS with a splash- and an EPA-Logo?
I would like to try it anyways, maybe you can add some screenshots?