[Removed] request - HP Probook 4311s Whitelist Removal

[voodooboy]

I am really hoping someone here can help me unwhitelist this bios...

Manufacturer: HP
Model: ProBook 4311s
Bios Type: insyde
BIOS VERSION: F.0F
Bios Download Link: ftp://ftp.hp.com/pub/softpaq/sp51001-51500/sp51379.exe

Existing card = Intel WiFi Link 1000
ID:
PCI\VEN_8086&DEV_0084&SUBSYS_13158086&REV_00
PCI\VEN_8086&DEV_0084&SUBSYS_13158086
PCI\VEN_8086&DEV_0084&CC_028000
PCI\VEN_8086&DEV_0084&CC_0280

Many Thanks!

[camiloml]

Uploaded testfile for you. Just run the EXE and select where to unpack, it will launch the original flasher software, i imagine it will not work, but write down the error it shows and tell me.

I also included another version of the HPQflash utility that is already patched, so you can try it manually. Remember where you extracted the bios and launch by double clicking the patched HPQFlash.

[voodooboy]

Uploaded testfile for you. Just run the EXE and select where to unpack, it will launch the original flasher software, i imagine it will not work, but write down the error it shows and tell me.

I also included another version of the HPQflash utility that is already patched, so you can try it manually. Remember where you extracted the bios and launch by double clicking the patched HPQFlash.

Hi camiloml,

thank you for your jobs!
I will go on testing these days,.

[voodooboy]

Uploaded testfile for you. Just run the EXE and select where to unpack, it will launch the original flasher software, i imagine it will not work, but write down the error it shows and tell me.

I also included another version of the HPQflash utility that is already patched, so you can try it manually. Remember where you extracted the bios and launch by double clicking the patched HPQFlash.

Hi camiloml,

I run the EXE file and select where to uppack, the original flasher software was run automatically and the BIOS refresh Successfully. but i switch to another wireless Adapter(AR9280) and start my hp 4311s, it showed"104-Unsupported wireless network device detected. System Halted. Remove device and restart."

If i run the "HPQFlash_No_Rom.sig_check_patched.exe" file and click the "Next" button, OS(Win7) will reboot, the BIOS fail to refresh.

Do you have any kindly suggestion?

Thanks.

[camiloml]

Hmmmm remove or rename hptools partition and try to flash mod again.

[voodooboy]

Hmmmm remove or rename hptools partition and try to flash mod again.

Hi camiloml,

I only install some hardware device(wireless&video&audio and so on) and do not install hptools in my os(win7) after flash mod.

I can only see c & d partition from the Disk Management.

Thanks!

[camiloml]

Ok then if no hptools uefi partition is present the flashing shold have gone well and not reverted back automatically to original.

Will make another mod

[voodooboy]

Ok then if no hptools uefi partition is present the flashing shold have gone well and not reverted back automatically to original.

Will make another mod

Hi camiloml,

Do you mean I do not need to refresh the hp bios(sp51379) and wait for your new mod?

Thanks!

[camiloml]

Yes, i will make another mod, if all is working for you then don't need to flash original before the new mod.

---

Uploaded v2 for test, i wait your news

[voodooboy]

Yes, i will make another mod, if all is working for you then don't need to flash original before the new mod.

---

Uploaded v2 for test, i wait your news

Hi camiloml,

Good news!
Your v2 mod is working well and I am using the new wireless adapter(AR9280) now.
Thank you very much!