Request: EVGA 790i Ultra Xeon Support

[JohnDN]

I am requesting support for the Xeon E5405 (Harpertown) be added to the EVGA 790i Ultra motherboard.

BIOS Link: ftp://ftp.evga.com/bios/NF79P09.bin

What Happens: After removing my Pentium D and installing the Xeon E5405 it boots into Windows just fine. However, upon reboot I get post code "AA" on the motherboard display and no post at all on the monitor. I have to reinstall the Pentium D, let it POST, and then reinstall Xeon to get it to boot again. Same thing occurs if I install Xeon, and enter BIOS (instead of loading Windows) and exit with saving (even without changing anything). If I exit without saving it just reboots again like normal, no "AA".

AIDA64 Picture:


Processor: Xeon E5405
http://www.cpu-world.com/CPUs/Xeon/Intel...405A).html
CPU Spec Code: SLAP2
Picture of CPU:

Notes: BIOS P09 was chosen instead of P10 because P09 allows the use of 16GB of memory where P10 is limited to 8GB.

[genius239]

I have added xeon 771 microcode to the bios(It is a award bios).
It is cab be used 771 e54xx or l54xx c0 and e0 step cpu.(like e5450、e5440、l5420.....)
Try it !