![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
10-14-2016, 04:24 AM
Hello to all, nice to see you again ( had problem with my e-mail account and couldn't login to the site).
I have a laptop in my hands which is with damaged BIOS as the previous owner said,tried to update it,and went black.
I have also in my hands CH341APro with Cable clamp that i can hook my USB directly to the MicroChip (Bios) and program it from the beggining.
But here is the tricky part.
This program uses only .bin and .hex files.
My BIOS chip on board have the codes of :
1 )AMIC A25L080M-F <- Bios
2 )24LC0881 <- EEPROM
I go to Toshiba site and i download the : 3.30 version which is the last one.
I extract it and inside i find "BD3G3A46.WPH".
So how could i make this to be suitable to program it via my Program ?
I have a laptop in my hands which is with damaged BIOS as the previous owner said,tried to update it,and went black.
I have also in my hands CH341APro with Cable clamp that i can hook my USB directly to the MicroChip (Bios) and program it from the beggining.
But here is the tricky part.
This program uses only .bin and .hex files.
My BIOS chip on board have the codes of :
1 )AMIC A25L080M-F <- Bios
2 )24LC0881 <- EEPROM
I go to Toshiba site and i download the : 3.30 version which is the last one.
I extract it and inside i find "BD3G3A46.WPH".
So how could i make this to be suitable to program it via my Program ?
![[Valid RSS]](valid-rss.png "Validate my RSS feed")