Toshiba Satellite Pro L300-23L SLIC 2.1

[fadsarmy]

Please could you make slic 2.1 please

-Toshiba Satellite Pro L300-23L (PSLB9E-03F003EN)
-Bios revision: 2.20-WIN
-Bios Download Link: http://support1.toshiba-tro.de/tedd-file...083641.zip

Thanks.

[1234s282]

Here you go , i used Toshiba 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Toshiba%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[fadsarmy]

Here you go , i used Toshiba 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Toshiba%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

Thanks. When I try to flash in windows it says current bios is the same and then the program closes down. Please help.

[fadsarmy]

Here you go , i used Toshiba 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Toshiba%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

Thanks. When I try to flash in windows it says current bios is the same and then the program closes down. Please help.

Bump

[fadsarmy]

Here you go , i used Toshiba 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Toshiba%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

Thanks. When I try to flash in windows it says current bios is the same and then the program closes down. Please help.

Bump

Bump

[cyberpark]

what does bump means?

windows inside bios flash, you need change file platform.ini for same bios or old bios flash.

[Bios_Version_Check]
flag=0

;This flag is the switch of checking Bios Version. When flag is 1, utility will
;check Bios Version. If rom file Version is older than Bios, utility will display warnning
;message and close application. When flag is 0, utility won't check rom file version.

Do no flash on dos with /all option, as flashit ???.rom /all, it will break slic table.

[fadsarmy]

what does bump means?

windows inside bios flash, you need change file platform.ini for same bios or old bios flash.

[Bios_Version_Check]
flag=0

;This flag is the switch of checking Bios Version. When flag is 1, utility will
;check Bios Version. If rom file Version is older than Bios, utility will display warnning
;message and close application. When flag is 0, utility won't check rom file version.

Do no flash on dos with /all option, as flashit ???.rom /all, it will break slic table.

Thanks that worked.

Bump means to bring the topic up again.

[guidobras]

Hi,
download link is broken (http://dl.dropbox.com/u/747181/Toshiba%2...34s282.zip)

could you please upload it again?

Thank you

[sovem]

Hi,
download link is broken (http://dl.dropbox.com/u/747181/Toshiba%2...34s282.zip)

could you please upload it again?

Thank you

Bios mod: Satellite_Pro_L300_PS10220_TOSINV21
https://app.box.com/s/jqpy2tr86yd6mumb570o
Please post results.