Toshiba U940-DQS

[M11]

Please mod for SLIC 2.1.

Toshiba Satellite u940-dqs

BIOS v.1.30 link: http://support1.toshiba-tro.de/tedd-file...130700.zip

Please find AcpiTbls.rw here: http://www.mediafire.com/file/6o65q5yo0e...cpiTbls.rw

The story is:

I had original BIOS v1.20 installed, so I did OEM activation successfully.

After upgrading to 1.30 (dont ask why!!! ), SLIC Toolkit started complaining Invalidated".

All attempts to put SLIC 2.1 to the BIOS via phoenixtool266 failed - I tried almost all modes and settings.

When I try to put, say, ASUS key, phoenixtool complains the certificate doesnt match PubKey. I do suspect I need to replace it, but dont know how.

I used Aptio 4 AFUWIN to flash.

Please help!

[M11]

Maybe its worth emphasizing I had Windows activated before flashing newer BIOS from the manufacturer.

I read somewhere that it might be a "hardware change" issue that causes Windows to lose its activation.

If you think so as well, then reinstalling Windows would be a suitable solution for me (if helps of course) since I dont have any sensitive data to back up etc.

[Serg008]

Please mod for SLIC 2.1.

Toshiba Satellite u940-dqs

BIOS v.1.30 link: http://support1.toshiba-tro.de/tedd-file...130700.zip

Please find AcpiTbls.rw here: http://www.mediafire.com/file/6o65q5yo0e...cpiTbls.rw

The story is:

I had original BIOS v1.20 installed, so I did OEM activation successfully.

After upgrading to 1.30 (dont ask why!!! ), SLIC Toolkit started complaining Invalidated".

All attempts to put SLIC 2.1 to the BIOS via phoenixtool266 failed - I tried almost all modes and settings.

When I try to put, say, ASUS key, phoenixtool complains the certificate doesnt match PubKey. I do suspect I need to replace it, but dont know how.

I used Aptio 4 AFUWIN to flash.

Please help!

try this mod https://www.sendspace.com/file/4g5uyq

Post results.

[M11]

Please mod for SLIC 2.1.

Toshiba Satellite u940-dqs

BIOS v.1.30 link: http://support1.toshiba-tro.de/tedd-file...130700.zip

Please find AcpiTbls.rw here: http://www.mediafire.com/file/6o65q5yo0e...cpiTbls.rw

The story is:

I had original BIOS v1.20 installed, so I did OEM activation successfully.

After upgrading to 1.30 (dont ask why!!! ), SLIC Toolkit started complaining Invalidated".

All attempts to put SLIC 2.1 to the BIOS via phoenixtool266 failed - I tried almost all modes and settings.

When I try to put, say, ASUS key, phoenixtool complains the certificate doesnt match PubKey. I do suspect I need to replace it, but dont know how.

I used Aptio 4 AFUWIN to flash.

Please help!

try this mod https://www.sendspace.com/file/4g5uyq

Post results.

Awesome! It works! Thank you!