Ok after a lot of trys i flashed my dv9715nr with this file from .. AHMED HOSSAM..
http://www.mediafire.com/?o282rxhlxrvdxi1
This is what he says to do..
extract the archive then click on the FLASH32.BAT if you use 32bit system or FLASH64.BAT if you use 64 bit system .
- the original bios has 2 files and it seems that there are 2 models of your notebook and it checks for the model then flash the right file...........so click on the flash32.bat or flash64.bat and don`t flash directly from dos as you don`t knew the right file .
If you are like me this is hard to under stand to get it to work.. i will explane how i installed it..
First down load the above file to desk top to a folder then extract it..
1 First see if your bios is 32 bit or 64 bit as stated above..
2 Then left click on the FLASH32.BAT if you use 32bit system or FLASH64.BAT if you use 64 bit system .let it do its thing
3 Now chose your wph file.. The 30CFF34A.WPH // IS 64 BIT// AND THE 30CFF34B.WPH IS 32 BIT..
4 Now coppy and past your bios A OR B Into the Winplash64 folder.. DO NOT RE NAME THE FILE
5 Now open the winplash64 folder// then click and Run the winplash application.. if all gos well you will have a new bios with a main menu .. as AHMED HOSSAM States in this link...
https://www.bios-mods.com/forum/Thread-H...ck-request
Thanks to Ahmed Hossam for his work on a great file
And big thanks to BDMASTER for all his help and advise with out his help this would not have been posable for me..............