request slic2.1 ECS(elitegroup) KT600-A v1.0

[racky29]

Motherboard: ECS (elitegroup) KT600-A v1.0
BIOS Type: AWARD BIOS
Download Page: http://www.ecs.com.tw/ECSWebSite/Product...=0&LanID=0
BIOS Download: http://www.ecs.com.tw/ECSWebSite/Downloa...=3&LanID=0
BIOS Version: 1.2C
BIOS DATE : 2004/12/21
request Dell Slic 2.1 for windows 7

[1234s282]

Here you go , i used Dell 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/ECS%20KT6...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[racky29]

thanks for this, the motherboard's bios is dead at the moment so im waiting for my willem programmer to come before i can flash this mod
i will report back when ive fixed the motherboard and tested the slic mod
nice work

this board has a Soldered PLCC32 Chip, so im gonna have to carefully rework this board