Welcome
|
You have to register before you can post on our site.
|
|
[Requests]HP Pavilion g4-1000 Series For UEFI
|
Posts: 37
Threads: 7
Joined: May 2013
Reputation:
0
05-22-2014, 08:02 PM
(This post was last modified: 05-22-2014, 08:06 PM by gujiangjiang.)
(05-22-2014, 07:49 PM)donovan6000 Wrote: Hey gujiangjiang,
It looks like you are able to recover from a brick, so would you mind test something for me? Try flashing all four of these roms. Let me know which ones brick and which don't. This'll help us determine which bios are moddable and which are not. Thanks!
Hello donovan6000,
My BIOS can't be recoveryed,i try all method to recovery it but faillure.Finally,i just remove bettary for CMOS and wait 5min ,when i turn on the laptop,the screen display following word:
The CMOS checksum is invalid.
The CMOS will be reset to the default configuration and will be rebooted.
Please check your BIOS Setup options to see if they changed.
CMOS Reset (502)
ENTER - Reboot the system
Then i press enter and laptop reboot byitself,and then it can boot into desktop,so i flashed the offical BIOS from HP website.
So the laptop was final now but i still can't recovery it by using U-Disk or HardDisk.
Then
Your Four files i will help trying to flash it ,and i will report here.
Thanks
Regards!
Sent from my iPhone using Tapatalk
(05-21-2014, 07:55 PM)gujiangjiang Wrote: (05-21-2014, 09:30 AM)BDMaster Wrote: I will ask to Donovan to check this mod so He will do working one !
Write You too to Donovan a PM asking for It, please !
Regards
Ok Donovan sent to me the DLL patched, so copy and replace original with this one into Bios
Folder I sent last time (that which has bricked laptop) and try to reflash again !
http://www.mediafire.com/download/m7d29m...sh.dll.zip
Let me know
Regards
Just replace one DLL can prevent bricked laptop.Thats amazing.
I will try.
Thanks you for your replay.
Sent from my iPhone using Tapatalk
The DLL was replaced in origial package,so there is no need to change DLL file.
PS: I checked the HEX between two DLL ,and i find they all same.
So i think the brick is not be DLL problem.
Sent from my iPhone using Tapatalk
Intel Core i5 2410M @ 2.30GHz
Sandy Bridge 32nm Technology
6.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Hewlett-Packard 166D (CPU1)
Intel HD Graphics 3000
119GB ATA PLEXTOR PX-128M5 SCSI Disk Device (SSD)
Posts: 409
Threads: 2
Joined: Jan 2013
Reputation:
51
Be very careful then if your not able to get the normal USB recovery method to work. I don't want you to brick you laptop
Also, what could you not get working with the USB recovery method?
Posts: 37
Threads: 7
Joined: May 2013
Reputation:
0
(05-22-2014, 08:13 PM)donovan6000 Wrote: Be very careful then if your not able to get the normal USB recovery method to work. I don't want you to brick you laptop
Also, what could you not get working with the USB recovery method?
I also want to know
I try to make a hp uefi inviroment and put 0166c.bin & 0166c.sig to current ,then press win+B,but when i turn on the laptop,he SCAP was flash twice a time,the WIFI was red,the Fan doesn't run.
I also try HardDisk,HP_Tools,but have same bad result.
Luckly,i remove bettary from CMOS and saved my laptop.
just now ,my friend with same model 1018tu talk to me, he recovered from U-Disk successfully.
so he give my confidence!
Very thanks for your help
regards!
Sent from my iPhone using Tapatalk
Intel Core i5 2410M @ 2.30GHz
Sandy Bridge 32nm Technology
6.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Hewlett-Packard 166D (CPU1)
Intel HD Graphics 3000
119GB ATA PLEXTOR PX-128M5 SCSI Disk Device (SSD)
Posts: 3
Threads: 1
Joined: Jun 2013
Reputation:
0
(05-22-2014, 07:49 PM)donovan6000 Wrote: Hey gujiangjiang,
It looks like you are able to recover from a brick, so would you mind test something for me? Try flashing all four of these roms. Let me know which ones brick and which don't. This'll help us determine which bios are moddable and which are not. Thanks!
F15、F23&F24 are OK .F32 is brick.
Posts: 37
Threads: 7
Joined: May 2013
Reputation:
0
(05-22-2014, 08:13 PM)donovan6000 Wrote: Be very careful then if your not able to get the normal USB recovery method to work. I don't want you to brick you laptop
Also, what could you not get working with the USB recovery method?
My friend has test these bios just now.
Result:
F15:OK,with no advanced menu.
(found a wrong word Main "Nain")
F23::OK,with no advanced menu.
F24::OK,with no advanced menu.
F32:No.Laptop was bricked.
Thanks for your hardworing.
Regards!
Sent from my iPhone using Tapatalk
Intel Core i5 2410M @ 2.30GHz
Sandy Bridge 32nm Technology
6.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Hewlett-Packard 166D (CPU1)
Intel HD Graphics 3000
119GB ATA PLEXTOR PX-128M5 SCSI Disk Device (SSD)
Posts: 409
Threads: 2
Joined: Jan 2013
Reputation:
51
Thanks for testing those. That really helps validate some of my ideas abotu RSA bios
I never said I unlocked any tabs. I just changed 'Main' to 'Nain' because I wanted a quick way to make the rom would fail the RSA check. Now we know the bios for your computer made before F32 are moddable and all after and including F32 are not moddable. That's pretty good since before we could only guess which of the 16 bios released for your computer were moddable
Did both you and your friend manage to unbrick both your computers?
I'll upload a modded F.24 in a couple minutes. Thanks again!
Posts: 37
Threads: 7
Joined: May 2013
Reputation:
0
(05-22-2014, 10:57 PM)donovan6000 Wrote: Thanks for testing those. That really helps validate some of my ideas abotu RSA bios
I never said I unlocked any tabs. I just changed 'Main' to 'Nain' because I wanted a quick way to make the rom would fail the RSA check. Now we know the bios for your computer made before F32 are moddable and all after and including F32 are not moddable. That's pretty good since before we could only guess which of the 16 bios released for your computer were moddable
Did both you and your friend manage to unbrick both your computers?
I'll upload a modded F.24 in a couple minutes. Thanks again!
Thanks Very much.
My friend was recoveryed from U-Disk,so he does't matter test the bios.
What about UEFI?That's my most want.
Regards!
Sent from my iPhone using Tapatalk
Intel Core i5 2410M @ 2.30GHz
Sandy Bridge 32nm Technology
6.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Hewlett-Packard 166D (CPU1)
Intel HD Graphics 3000
119GB ATA PLEXTOR PX-128M5 SCSI Disk Device (SSD)
Posts: 409
Threads: 2
Joined: Jan 2013
Reputation:
51
Here you go. You'll find an EFI boot setting under the system configurations tabs. Eventhough this setting exists, I've never seen anyone successfuly get EFI working perfectly on one of these older HP laptops. Insyde and HP decided to remove a lot of EFI functionality. All we can do is unlock options, so if it doesn't work then there's nothing we can do about it
And try to come back to this forum during the next couple of days. I have one more thing I want you to test regarding RSA bios modding. Hopefully this test will be able to dtell us if the signature verification check is in the PEI or DXE region of the rom
Posts: 37
Threads: 7
Joined: May 2013
Reputation:
0
(05-22-2014, 11:36 PM)donovan6000 Wrote: Here you go. You'll find an EFI boot setting under the system configurations tabs. Eventhough this setting exists, I've never seen anyone successfuly get EFI working perfectly on one of these older HP laptops. Insyde and HP decided to remove a lot of EFI functionality. All we can do is unlock options, so if it doesn't work then there's nothing we can do about it
And try to come back to this forum during the next couple of days. I have one more thing I want you to test regarding RSA bios modding. Hopefully this test will be able to dtell us if the signature verification check is in the PEI or DXE region of the rom
Ok,no problem.
Thanks.
Sent from my iPhone using Tapatalk
Intel Core i5 2410M @ 2.30GHz
Sandy Bridge 32nm Technology
6.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Hewlett-Packard 166D (CPU1)
Intel HD Graphics 3000
119GB ATA PLEXTOR PX-128M5 SCSI Disk Device (SSD)
Posts: 37
Threads: 7
Joined: May 2013
Reputation:
0
(05-22-2014, 11:36 PM)donovan6000 Wrote: Here you go. You'll find an EFI boot setting under the system configurations tabs. Eventhough this setting exists, I've never seen anyone successfuly get EFI working perfectly on one of these older HP laptops. Insyde and HP decided to remove a lot of EFI functionality. All we can do is unlock options, so if it doesn't work then there's nothing we can do about it
And try to come back to this forum during the next couple of days. I have one more thing I want you to test regarding RSA bios modding. Hopefully this test will be able to dtell us if the signature verification check is in the PEI or DXE region of the rom
Helllo donocan6000,i test the ROM,works fine,but have some mistake.
1.
Look those Square between the menu...
2.UEFI Boot might not work even turn on the EFI Boot.
I think,Can anyone add the EFI Modules to this BIOS to become EFI Boot.
Thanks.
Reagrds!
Intel Core i5 2410M @ 2.30GHz
Sandy Bridge 32nm Technology
6.00 GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Hewlett-Packard 166D (CPU1)
Intel HD Graphics 3000
119GB ATA PLEXTOR PX-128M5 SCSI Disk Device (SSD)
|
Users browsing this thread: 2 Guest(s)
|