|
Welcome
|
You have to register before you can post on our site.
|
|
|
[REQUEST] Acer Aspire VN7-591G: BIOS Unlock
|
Posts: 10,320
Threads: 3
Joined: Oct 2011
Reputation:
540
This uses a trick into NVRAM variables Unlocking Intel Page unlock some options
and then using second trick SLEEP unlock Eeprom tempranely to permit Flash
Bios Mod from Windows !
Only this Bio get this Trick = Intel Page variable !
So your Bios forget It, i am sorry 
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use ! 
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 10,320
Threads: 3
Joined: Oct 2011
Reputation:
540
0xA763D Setting: Intel Page, Variable: 0x258 {05 A6 6B 01 E2 00 0C 00 34 12 58 02 00 10 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0xA7663 Option: Disabled, Value: 0x0 (default) {09 0E FD 00 10 00 00 00 00 00 00 00 00 00}
0xA7671 Option: Enabled, Value: 0x1 {09 0E FE 00 00 00 01 00 00 00 00 00 00 00}
0xA767F End of Options {29 02}
You can use the Falseclock Method like all users !
Follow americabcd guide . . .
setup_var 0x258 0x1
https://www.bios-mods.com/forum/Thread-R...7#pid90017
When You got Menu Tabs Unlocked then We will try to read your Bios making a Backup and then
I will prepare a Bios Mod for You !
Let me know
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 10
Threads: 0
Joined: Mar 2015
Reputation:
0
(05-16-2015, 04:28 PM)BDMaster Wrote: 0xA763D Setting: Intel Page, Variable: 0x258 {05 A6 6B 01 E2 00 0C 00 34 12 58 02 00 10 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0xA7663 Option: Disabled, Value: 0x0 (default) {09 0E FD 00 10 00 00 00 00 00 00 00 00 00}
0xA7671 Option: Enabled, Value: 0x1 {09 0E FE 00 00 00 01 00 00 00 00 00 00 00}
0xA767F End of Options {29 02}
You can use the Falseclock Method like all users !
Follow americabcd guide . . .
setup_var 0x258 0x1
https://www.bios-mods.com/forum/Thread-R...7#pid90017
When You got Menu Tabs Unlocked then We will try to read your Bios making a Backup and then
I will prepare a Bios Mod for You !
Let me know
Regards
The advanced meun has unlocked but when I restart my laptop it took a long time to launch system and then I found everything was recovered.
Posts: 10,320
Threads: 3
Joined: Oct 2011
Reputation:
540
Try to clear your CMOS removing Battery from MoBo then
Set Default Settings into Bios Setup and save !
Then Set Secure Boot Disable and St Legacy Bios USB and try again the Patch !
Let me know
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 10
Threads: 0
Joined: Mar 2015
Reputation:
0
(05-17-2015, 03:54 AM)BDMaster Wrote: Try to clear your CMOS removing Battery from MoBo then
Set Default Settings into Bios Setup and save !
Then Set Secure Boot Disable and St Legacy Bios USB and try again the Patch !
Let me know
Regards I put the efi shell(bootx64.efi) into efi disk and set boot by easyuefi so that I can easily set settings without USB flash drive.
I didn''t clear CMOS and found this:
Setting: Secure Boot:, Variable: 0x24D {05 A6 8C 00 8D 00 20 AE 34 12 4D 02 04 10 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00}
0xA5F12 Option: Enabled, Value: 0x1 (default) {09 0E FE 00 10 00 01 00 00 00 00 00 00 00}
0xA5F20 Option: Disabled, Value: 0x0 {09 0E FD 00 00 00 00 00 00 00 00 00 00 00}
0xA5F2E End of Options {29 02}
So I boot into efi shell and enter this in command line:
setup_var 0x258 0x1
setup_var 0x24D 0x1
reboot
And then,bios settings was saved.
The reason that a long time system launch for I think is due to win8‘s Hybird Boot.Turn it off and I didn't find the problem anymore.
Thanks for your help. 
Posts: 10,320
Threads: 3
Joined: Oct 2011
Reputation:
540
well !
Do you want the Bios Mod or You prefer this You got so far ?
If You need It Then i will prepare for you and then You have to flash It as into
vodek tutorial using SLEEP trick !
let me know
Regards
[size=undefined]Your Brain [/size]. . . . It's the best tool U can use !
[size=undefined]Don't FLASH the Bios Mod if You get a Size Alert, You risk a Brick !!! [/size]
Donate to me for my work, click here BDM
Posts: 10
Threads: 0
Joined: Mar 2015
Reputation:
0
(05-17-2015, 05:14 PM)BDMaster Wrote: well !
Do you want the Bios Mod or You prefer this You got so far ?
If You need It Then i will prepare for you and then You have to flash It as into
vodek tutorial using SLEEP trick !
let me know
Regards
that's enough,thanks for your help.
Posts: 9
Threads: 0
Joined: May 2015
Reputation:
0
Hi all,
(I'm new to the BIOS modding scene and have been out of the overclocking game for a couple of years!)
For some reason, EFI shell gets stuck on my VN7-591G. I get the prompt, but cannot type anything.
rjw123 - since you seem to have got this to work, could you explain a couple of things for me please?
1) Did you use USB key to boot from? A previous post indicates that you might have just placed the file on the hard disk.
2) Am I correct in assuming that all I need to do to unlock the advanced menu is change the 0x258 variable to 0x1 as per the instructions?
3) What settings does this unlock and will it enable some bus / clock speed / CPU power tweaks?
Many thanks!
Posts: 10
Threads: 0
Joined: Mar 2015
Reputation:
0
05-20-2015, 05:01 AM
(This post was last modified: 05-20-2015, 05:07 AM by rjw123.)
(05-20-2015, 02:56 AM)jimbomahoney Wrote: Hi all,
(I'm new to the BIOS modding scene and have been out of the overclocking game for a couple of years!)
For some reason, EFI shell gets stuck on my VN7-591G. I get the prompt, but cannot type anything.
rjw123 - since you seem to have got this to work, could you explain a couple of things for me please?
1) Did you use USB key to boot from? A previous post indicates that you might have just placed the file on the hard disk.
2) Am I correct in assuming that all I need to do to unlock the advanced menu is change the 0x258 variable to 0x1 as per the instructions?
3) What settings does this unlock and will it enable some bus / clock speed / CPU power tweaks?
Many thanks!
first, I download the efi shell from here: https://www.bios-mods.com/forum/Thread-R...7#pid90017
what I only do is that I put the file(bootX64.efi) into efi partition by using diskpart to assign drive. you need to get administrator promote and open explorer.exe to access the efi partition.and then, use easyuefi to set boot options.
ensure your bios version,my bios version is v1.13 and I can't guarantee the right variable in your bios.
there are some settings. ![[Image: dDjvsXB*QAAA&ek=1&kp=1&pt=0&bo=dASAAkAGg...viewer_311]](http://a2.qpic.cn/psb?/0f9f5443-512c-4424-98a4-b947c9632e85/2AGhuEIM*pjw1v59g0sGeye5*hwm2EX5u*xh41jLCrg!/b/dDjvsXB*QAAA&ek=1&kp=1&pt=0&bo=dASAAkAGggMFCB4!&sce=0-12-12&rf=viewer_311)
Posts: 10
Threads: 0
Joined: Mar 2015
Reputation:
0
(05-20-2015, 05:01 AM)rjw123 Wrote: (05-20-2015, 02:56 AM)jimbomahoney Wrote: Hi all,
(I'm new to the BIOS modding scene and have been out of the overclocking game for a couple of years!)
For some reason, EFI shell gets stuck on my VN7-591G. I get the prompt, but cannot type anything.
rjw123 - since you seem to have got this to work, could you explain a couple of things for me please?
1) Did you use USB key to boot from? A previous post indicates that you might have just placed the file on the hard disk.
2) Am I correct in assuming that all I need to do to unlock the advanced menu is change the 0x258 variable to 0x1 as per the instructions?
3) What settings does this unlock and will it enable some bus / clock speed / CPU power tweaks?
Many thanks!
first, I download the efi shell from here: https://www.bios-mods.com/forum/Thread-R...7#pid90017
what I only do is that I put the file(bootX64.efi) into efi partition by using diskpart to assign drive. you need to get administrator promote and open explorer.exe to access the efi partition.and then, use easyuefi to set boot options.(all I do for this is that I don't need to get a usb flash drive.)
ensure your bios version,my bios version is v1.13 and I can't guarantee the right variable in your bios.
there are some settings.
|
Users browsing this thread: 2 Guest(s)
|
![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
![[Valid RSS]](valid-rss.png "Validate my RSS feed")