Hello, Is it possible to clear WIFI whitelist from Lenovo G580 20150 Bios 5ECN95WW(V9.00)? I made a backup with BACKUP_Tools19p which completed but showed some errors, included in the uploaded file. Thanks in advance.
(02-15-2022, 10:13 AM)stfederico Wrote: Hello, Is it possible to clear WIFI whitelist from Lenovo G580 20150 Bios 5ECN95WW(V9.00)? I made a backup with BACKUP_Tools19p which completed but showed some errors, included in the uploaded file. Thanks in advance.
Hi
Your mod completed. Check your messages
This mod for this notebook ONLY !!!
Posts: 2
Threads: 0
Joined: Feb 2022
Reputation:
0
Hi!!
Could you be so kind and delete wifi card whitelist?
Make Bios Backup whit Backup Tools, see link. https://www.sendspace.com/file/zve4i6
Lenovo G580, modelo 2189 Bios 5ECN96WW (V9.1)
¡Thanks in advance!
Posts: 6,559
Threads: 0
Joined: Jun 2016
Reputation:
538
--- Flash Image Information --
Signature: VALID
Number of Flash Components: 2
Component 1 - 4096KB (32768Kb)
Component 2 - 2048KB (16384Kb)
Regions:
Descriptor - Base: 0x000000, Limit: 0x000FFF
BIOS - Base: 0x180000, Limit: 0x5FFFFF
ME - Base: 0x001000, Limit: 0x17FFFF
GbE - Not present
PDR - Not present
Master Region Access:
CPU/BIOS - ID: 0x0000, Read: 0x0B, Write: 0x0A
ME - ID: 0x0000, Read: 0x0D, Write: 0x0C
GbE - ID: 0x0118, Read: 0x08, Write: 0x08
Total Accessable SPI Memory: 6144KB, Total Installed SPI Memory : 6144KB
FPT Operation Passed
8.1.60.1561 : Test on Reading - successfully !
8.1.60.1561 : Test on Writing - Error!
Error 28: Protected Range Registers are currently set by BIOS, preventing flash access.
Please contact the target system BIOS vendor for an option to disable Protected Range Registers.
------------------------------------------------------------
FPT ver.8.1.60.1561 --- END ---
------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------
Error 26: The host CPU does not have read access to the target flash area. To enable read access for this operation you must modify the descriptor settings to give host access to this region.