(12-07-2016, 11:47 AM)ionmang20 Wrote: Let me know what have you managed to unlock with ModBin6.
actually ionmang20, I've flashed a different BIOS version - v5.63 from the sp49108.exe pack (and created my own slic 2.1 mod out of the unmodded v5.63 bios file) onto the Narra3 board of my HP computer more than a year ago and I'm using an AMD Phenom II X4 B97 processor - no unlock options. I just didn't really had the time to use ModBin6 & risk bricking the HP computer, plus the ModBin6 tool requires a
32bit Windows OS (doesn't work correctly on a 64bit OS since I was using x64 Windows 7).
screenshot of narra3 bios v5.63 from CPU-Z (I may post up a modded v5.63 bios later on if someone wants it as it used to be available long time ago but is no longer there)
[attachment=14034]
(02-13-2018, 02:11 PM)CompDoc1972 Wrote: Hi guys does anybody have a new link for the bios Asus M2N68-LA (Narra3) please
ok I've decided to take matters into my own hands and fortunately I still have a copy of the v5.10 SLIC 2.1 mod - I've posted it here since nobody else wanted to post it up:
https://www.sendspace.com/file/4395c5
(this is a
temporary link, so download ASAP when you see this - link may be valid
for a limited time)
I may consider posting it in the future on either Google Drive or MS Onedrive when the Sendspace link expires
Edit 3/7: there seems to be a
confusion as to whether users are actually using a
NARRA3 board or not. The link that I have
is the correct version with the
correct flash BIOS size (
1024k - v5.10 dated 2/21/2008) and for
NARRA3 boards only (NOT for Narra2 & older and definitely not for Narra5/Narra6). the one previously linked to dropbox (v5.13 dated 10/2007) is for the older
NARRA or
NARRA2 boards and has a flash BIOS size of
512k, which will NOT work with the NARRA3 & higher boards and could possibly render these boards unbootable when using the wrong flash BIOS file.
Use either the
CPU-Z tool & click on the Mainboard tab of that program (like in the attached picture) OR the
Speccy tool & click on the Motherboard section of that program to verify that a
NARRA3 board is used before flashing. Another way of checking is to open up the computer case and look at the
actual markings/writings of the motherboard - it should say
M2N68-LA rev. 3.02. If the rev. no says other than 3.02 [ex. 1.01 or 5.00], then do not proceed any further. Only users with M2N68-LA Narra3 board revision 3.02 can use the v5.10 download that I've posted.
Edit 3/18: Folks, before flashing any modded bios
please use high quality PSUs like Corsair, Antec, Enermax, Seasonic, OCZ, etc. with these M2N68-LA boards and NOT the stock HP OEM PSUs that were made by Bestec as these M2N68-LA boards are prone to the
capacitor plague & failing prematurely, and may require ordering an M2N68-LA replacement capacitor kit from
Badcaps.net to replace the faulty capacitors if you don't like replacing these boards. Be sure to replace the Bestec PSUs with some of the well known brand PSUs that I mentioned (I'm currently using the Narra3 board with an Enermax EG465P-VE SFMA 2.0 power supply unit and that board hasn't failed with that psu)