Abit AN78GS Phenom X2-240 Support

[p4spooky]

Calling all experts:

Request to add CPU support for this board if possible.

Current Bios (11)

Thanks for your help and great work guys. Bios attached if there are any issues with the link.

[p4spooky]

Spent some time this weekend reading through the tutorials here and studies some updates from the Wiz.



Updated NCPUCODE.bin and AGESACPU.rom in Bios-11 and hotflashed to a backup chip

Up and running on X2-240 overclocked to 3.5

Some issues with this updated Bios:

1. Cool-n-Quiet does not work
2. Default VCore is set a little high for the chip (1.42). Should default to 1.2 for this chip.

CPU-z Validation

FLASH ATTACHED BIOS AT YOUR OWN RISK. HAVE A BACKUP STRATEGY BEFORE FLASHING

Backup Download Link Mirrored By 1234s282 - http://www.bios-mods.com/BIOS/CPU/AN78GS...-Added.rar

[xpeacex]

hi !!!! because of you my motherboard damage !!! [censored]...everyone don't used this bios from her

[TheWiz]

Did you read the voltage warning he posted? Is the board damaged or did you just have a bad flash? You aren't making it very easy for us to help you.

TheWiz

[xpeacex]

yes i read..i don't know is it the board damaged or bad flash..i just know when i have done flash then i turn off my cpu then clear cmos through the jumper..then i turn on cpu, but the screen is blank,,please help

Did you read the voltage warning he posted? Is the board damaged or did you just have a bad flash? You aren't making it very easy for us to help you.

TheWiz