Acer Z5610 phoenix bios modification

[appadura]

Hi,
I want to modify my acer z5610 bios to see the hidden section ,since the present bios option is not having fan speed control.the pc is heating up too much and tripping often.
regards
ramesh

[AHMED HOSSAM]

there is only one option for fan and it`s the Smart fan control .
do you want to unlock it ! , i think it will keep your fan running at 100% all time if you disabled it

[appadura]

there is only one option for fan and it`s the Smart fan control .
do you want to unlock it ! , i think it will keep your fan running at 100% all time if you disabled it

yes sure until acer do something i want to run the fan at 100% and sure i will pay donation if its works good
thanks
ramesh

[AHMED HOSSAM]

Hi Appadura ,

i have unlocked the smart fan option as well as some tabs , please flash it and i will wait your reply


  BIOS_Acer_P01.B2_Windows_ASZ5600 Z5610.rar (Size: 1.14 MB / Downloads: 149)

[AHMED HOSSAM]

I have replied to your PM and you reported that the SMART FAN option is not working .
i told you about the DSDT solution and here is another excellent solution :-

First , i will ask you if you have 3pin fan connector or 4pin connector !!

2nd , here is the solution and the explain :-

fans are controlled via EC FW and the EC FW measures fan speeds then decide to turn it off , increase speed or decrease speed .

- in case that there are 3pin fan connector with fan has 3wires like this pic :-



the 3 wires will be used like this :-
1st BLACK ------ GND
2nd RED ---------- 12VDC OR 5VDC
3rd yellow ----------- FAN TECHNOMETRIC SIGNAL

the fan and the EC FW use the 3rd wire to report the fan speed and controlling its speeds .
IF YOU REMOVED THIS WIRE THEN POWER ON YOU NOTEBOOK , YOU WILL FIND FAN ALWAYS RUN AT 100% FULL SPEED ALL THE TIME .


--- In case you found that you have 4pin fan connector like this :-



then you will have these wires in the fan connector :-
1st BLACK --------- GND
2nd YELLOW -------- 12VDC
3rd GREEN ---------- SENSOR
4th BLUE ------------ FANCONTROL

IF YOU REMOVED THE BLUE AND GREEN WIRES FROM THE CONNECTOR THEN THE FANS WILL RUN AT 100% FULL SPEED ALL THE TIME .


Now , you have 2 solutions :-
1 ) modifying the DSDT to adjust the fanspeeds .
2 ) using this posted method for removing the control or techosignal wire .

this solution is 100% working and i made it in my acer 5536G and made my fan run at 100% speed .

let me knew if you need anything .

[ruilourenco]

hi, i have a huge problem...a z5610 with a p01-a2 bios, should be a p01-a4.
it powers but says
"system configuration data updated
ERROR
System configuration data read error"
then i press del or any key and nothing happens, its frozen.
i try a usb pendisk with the correct drivers, pressing esc when powering up i can see something going on about phoenix but then stops...sometimes i can see the bios version installed others not....is the anything i can do to get it going? any help?
dunno if i should post here....im new here...
thanks in advance

rui

[AHMED HOSSAM]

Hi Rui , if the problem is only that you need to rename the version to be P01-A4 , i can do this easily for you .

-- The crisis disk should be working for your notebook , you need a usbstick with the crisis disk ( original bios.wph and the other files which the crisis utility copy to the usb ) then you should see the USB LED turning on an off during the flashing process for about 5 minutes .
if you don`t see the usb LED turning on an off , then the crisis disk is not working and you should try another usb stick or use the correct key combination .

-- another thing , have you tried removing the CMOS battery for 10 minutes then try to see if the problem is fixed !

first try removing the CMOS battery then try using the crisis disk .

[abiveteran]

HI Hassan,

is it possible to adjust/ the fan speed in the EC FW?

So that the first leve could be slow down.

I would be necessary for a thinkpad x121e.

Thank you in advance for your reply.

[magichands]

Hi, sent you a PM for help.

Thankyou.

Hi Appadura ,

i have unlocked the smart fan option as well as some tabs , please flash it and i will wait your reply

[PATTERN92]

Hi, sent you a PM for help.

Thankyou.

Hi Appadura ,

i have unlocked the smart fan option as well as some tabs , please flash it and i will wait your reply

Hi mate, how do install this?
from the boot menu i get bootMGR is missing.
help!!
thanks in advance