Login

rixter59 · 06-15-2017, 12:24 PM

(06-15-2017, 11:55 AM)DeathBringer Wrote: Good. Change FSB.

Ok fsb@1333.3, do you think I'd be able to push memory to 1066

***DeathBringer*** · (This post was last modified: 06-15-2017, 12:27 PM by DeathBringer.)

Show first tab of CPU-Z with "fsb@1333.3". This motherboard support DDR2 800 Mhz maximum.

rixter59 · 06-15-2017, 12:54 PM

(06-15-2017, 12:26 PM)DeathBringer Wrote: Show first tab of CPU-Z with "fsb@1333.3". This motherboard support DDR2 800 Mhz maximum.

Ok its at 1333.3 fsb. And I put the memory to 1066 and it would start but the temps were to hot, so its back to 800

***DeathBringer*** · (This post was last modified: 06-15-2017, 12:58 PM by DeathBringer.)

Ok. This task is solved.
It's old screenshot!

rixter59 · 06-15-2017, 12:59 PM

(06-15-2017, 12:56 PM)DeathBringer Wrote: Ok. This task is solved.

Question, is the fsb multiplied by 9 ? so 199.99x9=1.799 is this correct ?

***DeathBringer*** · 06-15-2017, 01:00 PM

FSB=800 on your screenshot, not 1333.

rixter59 · 06-15-2017, 01:00 PM

(06-15-2017, 12:56 PM)DeathBringer Wrote: Ok. This task is solved.
It's old screenshot!

Thats after I put fsb to 1333

***DeathBringer*** · 06-15-2017, 01:04 PM

Show page in BIOS with current settings with FSB.

rixter59 · (This post was last modified: 06-15-2017, 01:24 PM by rixter59.)

(06-15-2017, 01:04 PM)DeathBringer Wrote: Show page in BIOS with current settings with FSB.

Would heat stop the proc from going 1333fsb. And the computer will not restart after changes, I have to shut down then restart.

Oh shoot I see I have it linked, no wonder.

***DeathBringer*** · (This post was last modified: 06-15-2017, 01:28 PM by DeathBringer.)

You should set Memory Ratio to get 800 Mhz for memory.
Find the manual for overclocking!

Login
Username:
Password:	Lost Password?
	Remember me