![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
I did this for someone else on another forum. Haven't tested it so I'm not putting it in the confirmed section. Feel free to move it around or do what you want with the file. It does NOT have SLIC or anything else. Only change is Intel RAID 9.6.0.
Attached file or: http://rapidshare.com/files/426390723/p6...onrage.zip
EDIT: Rampage III Extreme does not work with RAID > 8.0.0. It is the first I have seen of an ICH10-based board not work with 9.6. This board could potentially have the same problem. Please try it and let me know. Just be sure to keep the stock version on your flash drive as well. If you don't use RAID mode normally, I would appreciate it if you would give it a try and let me know if it works.
Attached file or: http://rapidshare.com/files/426390723/p6...onrage.zip
EDIT: Rampage III Extreme does not work with RAID > 8.0.0. It is the first I have seen of an ICH10-based board not work with 9.6. This board could potentially have the same problem. Please try it and let me know. Just be sure to keep the stock version on your flash drive as well. If you don't use RAID mode normally, I would appreciate it if you would give it a try and let me know if it works.
Feel free to use/link/host any BIOS I post, no credit necessary. However, this is at your own risk and I take no responsibility. Always keep a backup of a known-good BIOS. Don't flash a motherboard if you don't have a backup computer just in case.
Always use RAID mode. RAIDFix
Always use RAID mode. RAIDFix
![[Valid RSS]](valid-rss.png "Validate my RSS feed")