Biostar 945P-A7A I94PA914 HP 2.1 SLIC

[Xyo]

I have been searching around for a while now and can not find any BIOS w/ 2.1 SLIC for this Biostar 945P-A7A motherboard.

Can someone help do a BIOS mod w/ 2.1 SLIC for this Biostar 945P-A7A motherboard?

The BIOS can be found HERE.

Thanks
Xyo

[1234s282]

Sorry for the delay - due to the large amount of requests we have received recently , i think this request may have been missed!!

Here you go , i used HP 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was successfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Biostar%2...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[Xyo]

Thank you for the bios mod. Am going to test it now...

Xyo

[Xyo]

Bios is working good so far.

Thanks,
Xyo