DELL Inspiron 530s - SLIC 2.1 Request

[linuxgod64]

I need a SLIC 2.1 Upgrade for my Inspiron 530s.

The link to the original is here:

http://ftp.us.dell.com/bios/530_1018.EXE

Thank you

[1234s282]

Here you go , i used Dell 2.1 SLIC + Certificate Included:-

1. Copy and paste ******.XRM-MS certificate file into C-Drive.

2. After pasting this file into C-Drive, go to START - ALL PROGRAMS - ACCESSORIES - COMMAND PROMPT. Right click on Command Prompt and RUN AS ADMINISTRATOR.

3. When Command Prompt opens, type at the prompt: slmgr.vbs -ilc c:\********.xrm-ms and hit the Enter Button. Wait for the Script Host to answer you with a message that the license was installed successfully....this could take a few minutes and so be patient.

4. After receiving the message that the license was installed successfully, type at the command prompt:

slmgr.vbs -ipk *****-*****-*****-*****-***** (Replace with any OEM SLP Product Key for your installed version of Windows 7 , they are not hard to find).Be Patient and wait for the message to say that the Product Key was sucessfully installed. After it says successfully installed, reboot the computer.

5. When you are back at your desktop, go to START - COMPUTER - right click on Computer and choose PROPERTIES and see if it is activated with an OEM product ID.

http://dl.dropbox.com/u/747181/Dell%20In...34s282.zip

Flash at your own risk!

Please Report Back With Whether It Worked Or Not!

Please Consider A Small Donation As A "Thank You" If You Are Happy With Our Work

Regards
Admin

[linuxgod64]

This Mod works great. Thanks!

Donations are on the way.

[stuckos]

I'm trying to use this on the Dell Inspiron 530. I get "Load Driver Failed!!" on Vista 32-bit. The bios should be the same for the 530 and the 530s, correct? Thanks.

[1234s282]

Yes , the 530 and 530s use the same bios

Admin

[mudrunner88]

Yes , the 530 and 530s use the same bios

Admin

Yeah I'm getting the same error trying to use winflash with vista 64-bit...put it in XP Mode with Admin rights and get the same error

[mudrunner88]

I tried to flash from DOS with awdflash and it set 100% and rebooted to no POST.

I seem to need help with BIOS recovery...The .bin file can't fit on a floppy as all the write ups say to try...

I made a usb flash drive bootable and copied the .bin and tried windows+b and end key but nothing happens...

Can anybody help me out?

[peteyduff]

The Dropbox link does not seem to work any longer. Any chance a new link could be provided for this file?

thanks for the help!