Gigabyte GA-8I945GZME-RH: Support for Core 2 Duo E7500 & Pentium E5700

[Zambezy76rus]

There is a Gigabyte Ga-8i945GZME-RH (Rev. 1.0) Board and a Core2duo e7500 (Wolfdale) processor . Unfortunately, the processor does not work at full capacity on this motherboard. Is it possible to modify the BIOS of this Board for Wolfdale series processors ? (maximum official support for Core2duo X6800 (Conroe)) The latest BIOS F10

[DeathBringer]

Explain exactly what happens when you try to boot with your E7500.

[Zambezy76rus]

Explain exactly what happens when you try to boot with your E7500.

The multiplier is automatically set to X6 , and the system bus is set to 200mhz without the possibility of changing... The fact is that I have already added the latest microcode to this Board manually ,including 1067A ,the processor is now detected correctly, but the multiplier does not make it higher and cannot determine the voltage correctly. Processor frequency is still 1200 MHz (FSB 200 x 6.0)

[DeathBringer]

Go to BIOS and do Load Defaults, save and reboot.
Then make TXT-report of CPU-Z. Zip it and attach.

[Zambezy76rus]

Зайдите в BIOS и выполните Load Defaults , сохраните и перезагрузитесь.
Затем сделайте TXT-отчет CPU-Z . Застегните и прикрепите.

[DeathBringer]

Make a screenshot of ThrottleStop (main window) with running TS Bench.

[Zambezy76rus]

Сделайте снимок экрана ThrottleStop (главного окна) с запущенным TS Bench .

[DeathBringer]

Download RWEverything. Try portable version.
Go to Access->Command and run the commands:
wrmsr 0x199 0x0 0xB25
rdmsr 0x198
Show a screenshot of results.
Then go to ThrottleStop's folder and delete file ThrottleStop.ini and run ThrottleStop.
Make new screenshot of ThrottleStop (main window) with running TS Bench.

[Zambezy76rus]

Скачать RWEverything . Попробуйте портативную версию.
Перейдите в Access -> Command и выполните команды:
wrmsr 0x199 0x0 0xB25
rdmsr 0x198
Покажите скриншот результатов.
Затем перейдите к ThrottleStop папки и удалить файл «s ThrottleStop.ini и запустить ThrottleStop .
Сделайте новый снимок экрана ThrottleStop (главное окно) с запущенным TS Bench .

[DeathBringer]

Now the multiplier is correct - x11
Can you in BIOS overclock FSB from 800 (200) to 1066 (266)?