HP G6 2135 sf

[lexou]

so now notebook is bricked ... black screen ..i'm going to try recovery steps and come back after (actually on an older comptuter )

[lexou]

black screen and nothing only 2 times on Num lock

[lexou]

hello

si i've tried to flash with usb but there is nothing to do if someone could help me thx

[BDMaster]

Have You rcovered your Bios or nothing yet ?
look here for Donovan's Guide :

http://donovan6000.blogspot.it/2013/06/i...overy.html

Here your Recovery Files :

http://rghost.net/60374217

Here your UEFI Bios Tool to prepare an USB for Recovery :

http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63259.exe

Let me know
regards

[lexou]

thx for your reply and help

i follow how to unbricked but USB start and after few minutes Num lock start 2 times like brick ... i put off CMOS for 5 hours last night and try but nothing to do

Maybie something wrong with the name ? my notebook is with w8.1 64 bits ,and i think UEFI partiton no installed so i'm looking for an other solution ( change 2 times Hp models are ....)

regards

[BDMaster]

Follow this suggestions from another user !

"my update info, after many times of trial and errors, i have finally made my bios recovery..

a little bit different ways from Donovan's tricks,

- i just place the .SIG and .BIN files into all three different folders (current, new, previous) inside my usb root place
- and then using the same steps from Donovan's to boot the usb,
- i release my win+B keys maybe 5sec more/less after i press the power button, and just before my usb light start to flashing
- (not after like Donovan's..) it takes only a few seconds after that for the screen to come up and show the recovery process..

gosh, it's quite relieved after almost 2 days..

Let me know
Regards

Extracted from :

https://www.bios-mods.com/forum/Thread-R...st-removal

[lexou]

thx friends

now i've got screen with this "unable to open bios image file " and loops but to see something is already good thx for that and the user give this solution

now must i try with an other image or a specific one ? thx for all

[BDMaster]

You have to use that recovery files I sent and rename them also as original :

0183AF05.bin
RSA.SIG

They are the originl names !
Let me know
Regards

[lexou]

thx for your reply

i've tried but the only names which let me show bios recovery is like :

0183A.bin
0183A.SIG

but same problem as before "unable to read BIOS image "

regards

[lexou]

so great thx a lot it works

the only change i've made it's the version of UEFI version ,i took the version before ( 62194 for my notebook ) and put the file like you said on an other post



thank you for all your help and patience ,sorry for my bad English ,i'm going to read some tutorials before trying something like this next time and better to taker an other notebook like HP ^^

regards