HP Z420 motherboard request

[dreadkopp]

Hey guys.

I've got this heavily modded Z420 workstation.

However the UEFI i crippled like [censored].

I've got two problems with that thing:

it brags about usb3 front header not being connected (connected the front header to another usb3 card but attached a PCI panel for the onboard usb3 header.

CPU fan speeds are way to high (it's watercooled)

if someone is able to remove the "press f1 to continue" warning after POST i would be more than thankful!

lowering the PWM values for the fans would be a nice-to-have

UEFI is attached.


Big thanks in advance!

[DeathBringer]

Make a photo of the screen with error "press f1 to continue".

[dreadkopp]

sure thing

[spoiler]

[/spoiler]

If needed i can provide a 'tour' through the uefi. poorly there is no switch to turn of these warnings.

[DeathBringer]

Sorry, no ideas.

[dreadkopp]

Thanks anyways for having a look

Looking at the UEFI using HexEdit. However i never did Bios modding on my own. Just patched UEFI Gop to a few vBIOS

someone told me that UEFI needs correct checksum for flashing ?

[DeathBringer]

Use UEFITool to edit this BIOS.

[dreadkopp]

thanks for UEFITool!

i guess i am looking for that two sections :

http://imgur.com/a/EReS3

but how to edit those XD. I hate being a n00b at new stuff

[DeathBringer]

1. Open
2. Right click ->Extract body
3. Edit "body" by HexEdit
4. Right click ->Replace body
5. Save

[dreadkopp]

thanks a lot! time to brick that thing then

or not... i have no idea what to do. all looks like gibberish to me. darn.

I attached the two extracted bodies, maybe someone can tell me something about it.