Help! Asus eee 1001px pcie not enough resources (code 12)

[phreak97]

Hi!
I'm doing some unintended mods to my Asus EEE 1001PX and I've hit a snag.

I have added usb wifi via an unpopulated connector on the motherboard to free up the pcie from the stock "onboard" wifi. That part is done and working.

I then want to use a mini pci-e parallel port controller so I can use my eprom burner etc.. this is where I have hit a snag.

I got an MCS9901 based serial/parallel controller which has two serial ports and parallel port.

Initially all three devices on the card said no resources available (code 12)

I then went in to the bios and disabled the onboard wifi which used to be in the pcie slot, this made function 0 start working (COM1), though it kept working after I updated the bios which re-enabled onboard wlan which is odd. I disabled onboard wlan again anyway.

I tried disabling the function 0 device and the function 1 device but function 2 still didn't get given resources.

I really only need the parallel port (function 2) to work..

What can I try?