Help me to split bios files (bios and EC) lenovo y570 bios 2.08

[Simitry]

Hello i want to flash my bios with this files but i cant do this  when they are as 2 files. Can someone pleeeease split them into 1

[BDMaster]

So do You want to get Firmware File ? or InsydeFlash file ?
Normaly Firmware is this one U5_Bios_Main_47CN30WW.BIN and It will be write
into component (EepromChip) U5 reading on Schematic will more easy !
Then Embedded Controller = EC = U38_KBC_47EC30WW.BIN is tp be write into
a different component (Eeprom Chip) U38 so read on Schematics again !
Now is clear that They are not to be togheter and can be togheter only before
wrote into respectiely Chips !
As I said many times the are separately into Insyde Folder Others are unified into
Bios (or Firmware) file and write then separately !
Now what do have to do ?
Let me know
Regards

P.S. read Schematics and You'll find that page 14 Eeprom Chip W25Q32BVSSIG 4096 KB
and page 47 Eeprom Chip MX25L1005AMC-12G SOP 128 Kbit / 8 = 16 KB

http://www.rom.by/files/748de_compal_la-6882p.pdf

[Simitry]

So do You want to get Firmware File ? or InsydeFlash file ?
Normaly Firmware is this one U5_Bios_Main_47CN30WW.BIN and It will be write
into component (EepromChip) U5 reading on Schematic will more easy !
Then Embedded Controller = EC = U38_KBC_47EC30WW.BIN is tp be write into
a different component (Eeprom Chip) U38 so read on Schematics again !
Now is clear that They are not to be togheter and can be togheter only before
wrote into respectiely Chips !
As I said many times the are separately into Insyde Folder Others are unified into
Bios (or Firmware) file and write then separately !
Now what do have to do ?
Let me know
Regards

P.S. read Schematics and You'll find that page 14 Eeprom Chip W25Q32BVSSIG 4096 KB
and page 47 Eeprom Chip MX25L1005AMC-12G SOP 128 Kbit / 8 = 16 KB

http://www.rom.by/files/748de_compal_la-6882p.pdf

i need kinda insyde flash file that will flash bios and ec to 2.08

[BDMaster]

Ok something like this :

http://rghost.net/85jWhLlX5

Let me know
Regards

[Simitry]

Thank you very much!!!! Bios flashed to 2.08 and ec too! But i saw a 2.06 file in insyde flash directory is it just a mistake or the part of a plan?

And can you please give me the advise because i dont know what to do. When i tried to update bios (a few days ago) by DOS using uniflash (and win98 boot as dos) i started uniflash and pressed " Clear CMos". After this my computer start to boot slower. The dark screen appears after Windows start icon and hold for the 5-6 sec (that newer happened before) and Welcome are loading 5-10 sec as well. Boot takes 40+ sec but before this it was 20-25.

[BDMaster]

I friend,
I used the Original File Installer v.2.06 to rebuild It !
So I forgot to remove the 2.06 version but the Platform.ini look only for
version 2.08
There is no problem but I did It again

P.S. try to load the default or best Settings into Bios and Save before exit !
I can only say that now all Firmware is rewrote and if It was not your now You Cloned one!

[Simitry]

Thank you very much man you helped me a lot with this bios because im so dumb in this programming things! Have a nice day!

[rokko123]

Ok something like this :

http://rghost.net/85jWhLlX5

Let me know
Regards

Hello, can you please reupload it? Maybe you also have 2.10 and 2.12 BIOS+EC file for InsydeFlash? I have lenovo y570, after update BIOS from 2.08 to 2.12, EC has remained 2.08.

I got 2.10 bin and could flash BIOS nad EC, but when I flash 2.12 EC remains 2.10.