Login

Britlord · (This post was last modified: 02-08-2010, 10:45 PM by Britlord.)

Hi all I have a Tyan Tiger MP 2460 motherboard and I would like it to support the MP processers all the way up to 2800+ . All the other ones like the K7 and the MPX do. it says the MP only up to 1900+

Thanks..

http://www.tyan.com/archive/products/html/tigermp.html

***TheWiz*** · (This post was last modified: 02-09-2010, 08:55 PM by TheWiz.)

Can you verify what kind of bios this is? The download shows up as a 515KB file, when it should be 512KB. Also, none of my BIOS tools open it, so I think you may have a unique BIOS.

TheWiz

Britlord · (This post was last modified: 02-10-2010, 05:50 PM by Britlord.)

(02-09-2010, 08:53 PM)TheWiz Wrote: Can you verify what kind of bios this is? The download shows up as a 515KB file, when it should be 512KB. Also, none of my BIOS tools open it, so I think you may have a unique BIOS.

TheWiz

Its Phoenix BIOS and the chip is 4 Mb Flash. my version is 1.05. so it can't be done eh?? how about SLIC 2.1..

***TheWiz*** · 02-10-2010, 05:51 PM

It may be possible, not sure yet. SLIC should be doable though.

TheWiz

Britlord · (This post was last modified: 02-10-2010, 07:11 PM by Britlord.)

Ok if it you can do it a nice Donation will be coming..

Oh here's a bios tool that will open the rom file (I did it)..

http://www.megaupload.com/?d=AJQBDDP2

It's Phoenix BIOS Editor2.2.0.1

Login
Username:
Password:	Lost Password?
	Remember me