I can not use the current bios just the old one - (SOLVED)

[adrianoxx]

my problem I can not give update of the h61h2-m2 v2 to the most current file (cpu evo 8mb) when I rewrite it with it simply turns on for a while and turns off the motherboard only works with the original bios

[Lost_N_BIOS]

What is current version of BIOS (Check with CPU-z), and please give me link to latest BIOS download at ECS (Direct download link, I cannot get anything to load on their site once I choose operating system, even tried multiple browsers)

In the "Updated" BIOS you attached, is that one you modified, or stock BIOS from ECS? I did not download yet, asking to confirm, I want to download stock BIOS first.

How are you updating the BIOS?

[adrianoxx]

What is current version of BIOS (Check with CPU-z), and please give me link to latest BIOS download at ECS (Direct download link, I cannot get anything to load on their site once I choose operating system, even tried multiple browsers)

In the "Updated" BIOS you attached, is that one you modified, or stock BIOS from ECS?  I did not download yet, asking to confirm, I want to download stock BIOS first.

How are you updating the BIOS?

"Updated" is the most updated bios direct from ecs site I am updating via re-recorder (burner) ch341a this is http://www.ecs.com.tw/extra/windows_8_su...90646A.zip the last bios that I put in the attachments just click on the executable to
put the program to run that would create a temp with the file bin another bios  http://www.ecs.com.tw/ECSWebSite/Product...24&LanID=0 the stock bios is "default old(works)H61H2-M2 V2.bin"

[Lost_N_BIOS]

If you are putting on with flash programmer (CH341A), are you sure you are doing these steps, if not please do and try again.
Erase, blank check, then open new BIOS file, write, then verify.

I use auto for last two steps, edit auto option and uncheck erase/blank and do those manually one by one, then auto for write/verify.

[adrianoxx]

If you are putting on with flash programmer (CH341A), are you sure you are doing these steps, if not please do and try again.
Erase, blank check, then open new BIOS file, write, then verify.

I use auto for last two steps, edit auto option and uncheck erase/blank and do those manually one by one, then auto for write/verify.

Problem solved the problem is the eeprom chip

[Lost_N_BIOS]

So chip was faulty? And it's working now with other chip? If yes, good you found problem and solved, thanks for update!

[adrianoxx]

So chip was faulty?  And it's working now with other chip?  If yes, good you found problem and solved, thanks for update!

Yes 2 chip with the same problem haha wtf

[Lost_N_BIOS]

Maybe bad batch of chips? If you buy anymore, get from another seller

[adrianoxx]

Maybe bad batch of chips?  If you buy anymore, get from another seller

two different chip from different sellers I have bad luck

[Lost_N_BIOS]

Hope your luck gets better!