ME mod with FITC bricking help

[frankr2994]

Hey there, I'm trying to modify ME with a new ICC profile. All I'm doing is adding a Overclocking ICC profile. No other settings being changed. However If I build a new .bin file with FITC and flash that Bin or just Flash the ME region it always results in a hard brick and I have to bring it back with an external programmer. I compared My bios dump vs opening the bios in FITC making no changes and building it. Tons of hex values change between them. 

ME Info 
FW Capabilities value is 0xC7A4945
Feature enablement is 0xC7A4945
Platform type is 0x463F1402
Intel® Manageability and Security Application code versions:

BIOS Version:                          A34
MEBx Version:                          9.0.0.0029
Gbe Version:                            1.3
VendorID:                              8086
PCH Version:                            5
FW Version:                            9.1.45.3000 H
LMS Version:                            11.7.0.1035
MEI Driver Version:                    11.7.0.1032
Wireless Hardware Version:              Not Available
Wireless Driver Version:                Not Available

FW Capabilities:                        0x0C7A4945

Using Flash Image Tool Version 9.1.10.1000

If someone could give me a proper run down on using FITC as I can only find limited info on it. I can also provide a dump file and mod file to be looked over.