Microcode update request for Foxconn FlamingBlade GTI and CPUID 206C2

[nitrous]

Hello guys. Outdated microcode for some X58 motherboards cause issues with a seemingly unresponsive Uncore multiplier on (I believe) all 6-core 32nm CPUs with CPUID 206C2.
My case is Foxconn FlamingBlade GTI and Xeon X5650 which has the revision 0F of the microcode whereas the fixed and working motherboards have revision 13 of it.

I'd like to learn how to update the microcodes by myself, remove the old ones and learn from what I've missed or misunderstood
I've managed to do the first part, following this guide.

The Micro Code Information part of CBROM bios.bin /D says:

Code:

** Micro Code Information **
Update ID CPUID | Update ID CPUID | Update ID CPUID | Update ID CPUID
------------------+--------------------+--------------------+-------------------
SLOT1 11 06A5 | SLOT1 11 06A4 | SLOT1 1A 06A0 | SLOT1 0B 06A1
SLOT1 19 06A2 | SLOT2 07 06E6 | SLOT1 04 06E5 | SLOT1 47 06E3
SLOT1 01 06E0 | SLOT1 02 06E1 | SLOT1 16 06C0 | SLOT1 03 06C1
SLOT1 0F 06C2 | SLOT1 13 06C2 |

I think I did it correctly. Please confirm. However, how do I remove the older one (0F 06C2)? I assume that this file is uncompressed, so perhaps I can open it with a hex editor and simply remove the last bits. However this seems like a dirty way. Is there a cleaner one?

Anyways, I'm attaching the microcodes. If you can find me a newer one than ver13, I'd be grateful. I've read somewhere that there is one, ver14, from 2011, but I'm unable to find it.
BIOS file here.

Microcodes are:
cpu000206c2_plat00000003_ver0000000f_date20100618.bin
cpu000206c2_plat00000003_ver00000013_date20100907.bin
I've extracted them from Intel's linux microcode updates. Not sure if this is the correct way to do it.

Can you please update the microcodes in the BIOS file and possibly remove the older 206C2 entry off it?
Thank you in advance!

[nitrous]

In case you need a donor BIOS, ASUS Sabertooth X58 has the latest microcodes and seems perfect.
BIOS download here.

Can anyone give this a try, please?

[genius239]

Hi~~
I have inject cpuid 06c2 microcode into this bios that you need .

[nitrous]

Thank you so much, it worked!

[hannse12]

i'm guessing the bios2.rar is the newer modifed one that i have to flash?

[Angel0]

Hi~~
I have inject cpuid 06c2 microcode into this bios that you need .

Hi,
sorry for coss posting .... but it's possible inject cpu code of xeon x56xx on bios of DFI x58 mainboard ?
Main thread is this : THREAD

[X58A-GD65er]

  7522vM3.zip (Size: 1.09 MB / Downloads: 18)

Hi~~
I have inject cpuid 06c2 microcode into this bios that you need .

Hello, I have a X58A-GD65 that I want to replace the i7-920 with a Xeon X5650.
If you could work your magic on the Bios I supply I would be Appreciative.

The bios file is attached X58A-GD65 (MS-7522) V22.3 BIOS.

Naturally if you are too busy, I will understand.

Thank you,

Michael

[genius239]

Hi~~
I have inject cpuid 06c2 microcode into this bios that you need .

Hello, I have a X58A-GD65 that I want to replace the i7-920 with a Xeon X5650.
If you could work your magic on the Bios I supply I would be Appreciative.

The bios file is attached X58A-GD65 (MS-7522) V22.3 BIOS.

Naturally if you are too busy, I will understand.

Thank you,

Michael

It is nothing to worry about,the original bios of X58A-GD65 is can be to support x5650.

[bru2basics]

Hi,

I've followed nitrous posts over from overclock.net and I'm desperately trying to get support for a x5650 on my MSI big bang xpower board but unfortunately I'm in way over my head and don't fully understand what is involved in modifying my bios. The chip works fine at stock but I have the issue of locked uncore ratio's. If someone could help me out it would be greatly appreciated. The bios I have currently is attached and if I'm correct in my understanding then what I need is exactly the same as nitrous had done with his. Many thanks in advance for any help that can be given.

Damian

[Speedy]

Hi~~
I have inject cpuid 06c2 microcode into this bios that you need .

I have the Foxconn FlamingBlade GTI and Xeon X5650 too. I think I should use your second upload (bios2.rar), right?