![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
1 hour ago
Hi all,
I’m not sure if this is possible, but I’m running a Lenovo ThinkCentre M90n-1 as an unattended embedded device. Occasionally on boot the AMI BIOS halts on a POST error (e.g., 0135 - fan failure) with the "Press F1 to enter Setup, F2 to resume". Since the unit is headless, it sits there until someone physically presses a key. Is there anyway to make the BIOS always continue on non-fatal POST errors without user input? The ROM file is attached.
Image of screen for example:
![[Image: e48e0e65b6b11d41aee5a97f8d9a23bffc2439d6.jpeg]](https://winraid.level1techs.com/uploads/default/original/3X/e/4/e48e0e65b6b11d41aee5a97f8d9a23bffc2439d6.jpeg)
I’m not sure if this is possible, but I’m running a Lenovo ThinkCentre M90n-1 as an unattended embedded device. Occasionally on boot the AMI BIOS halts on a POST error (e.g., 0135 - fan failure) with the "Press F1 to enter Setup, F2 to resume". Since the unit is headless, it sits there until someone physically presses a key. Is there anyway to make the BIOS always continue on non-fatal POST errors without user input? The ROM file is attached.
Image of screen for example:
![[Valid RSS]](valid-rss.png "Validate my RSS feed")