Need help

[soul_yan]

I used AMIBCP trying to unlock the Clevo P150 BIOS.

I changed all the Access/Use to User, just like 1.jpg

I found there is no option under the title after flash the modified bios. (2.jpg)

And I changed the root options as 3.jpg

It just like the original one, no extra options, still blocked...

And I changed the Access/Use to Supervisor, It still blocked when I entered the BIOS as supervisor.

The tool is AMIBCP v4.5
Could anyone help me?

[soul_yan]

Any body knows?

[Antinomy]

Because these menus are likely to be locked in another place while the one you've changed isn't really used. Chapters are locked in different ways than menus are.

[moral hazard]

I have the same problem. Is it possible to unlock chapters?
If so, how?

[Antinomy]

It should be possible for sure. We are still working on an algorithm for Aptio.

[Naman]

soul_yan; how do you enter the BIOS Setup Screen as 'Supervisor' ?

[Prema]

Ya same on the Clevo P170HM3, there is no chance to make anything visable, yet. Even some of the values we hardcode (like CPU multis) are just overwritten on boot...
Also dumping NVRAM with AMISCE (Aptio version) fails...

[moral hazard]

Ya same on the Clevo P170HM3, there is no chance to make anything visable, yet. Even some of the values we hardcode (like CPU multis) are just overwritten on boot...
Also dumping NVRAM with AMISCE (Aptio version) fails...

Did you try hardcoding the ram profile to enable XMP, it worked for my toshiba P750.
I can hardcode ram frequencies, but nothing else so far.

[Prema]

Ya same on the Clevo P170HM3, there is no chance to make anything visable, yet. Even some of the values we hardcode (like CPU multis) are just overwritten on boot...
Also dumping NVRAM with AMISCE (Aptio version) fails...

Did you try hardcoding the ram profile to enable XMP, it worked for my toshiba P750.
I can hardcode ram frequencies, but nothing else so far.

Same here, we can force the BIOS to use XMP profiles (if present) or even run RAM @ 2133Mhz...but there it basically ends and I have an XM CPU that waits for the day we can disable the hidden multi overwrite...

[soul_yan]

soul_yan; how do you enter the BIOS Setup Screen as 'Supervisor' ?

Just the "Security" Page, and Set a supervisor password. After that you got the supervisor account while you entered the code.

---

Ya same on the Clevo P170HM3, there is no chance to make anything visable, yet. Even some of the values we hardcode (like CPU multis) are just overwritten on boot...
Also dumping NVRAM with AMISCE (Aptio version) fails...

Did you try hardcoding the ram profile to enable XMP, it worked for my toshiba P750.
I can hardcode ram frequencies, but nothing else so far.

Same here, we can force the BIOS to use XMP profiles (if present) or even run RAM @ 2133Mhz...but there it basically ends and I have an XM CPU that waits for the day we can disable the hidden multi overwrite...

I think there is some module in this BIOS which Locked the hidden options.