Need help with hp g4 bios

[naifsiddibapa]

hi
well this is my first post ..am not sure weather i am on the right place
directly to the point .i got a hp laptop from the govt

i need help with its bios .. the bios splash screen is very much annoying it gives some kind of a logo... i don't know much about modding bios ... i really need to change the bios splash screen i used google to find some info

first of all the problem is i am not able to find the bios on the hp offical website (soi dont have any new bios to flash)

second i used the universal bios backup tool to back up the bios . i got the bios back up .but i am not able to flash the bios even with any changes

finally i used the the insyde flasher to make a backup luckily i was able to backup and reflash the same bios

now i have the working bios and the working flasher

then i used ezh20 tool to mod the bios and change the splash screen ..

.now here is the main problem . after modding the bios (changed only the splash screen) i am not able to flash the modded bios it gives error IHISI; FLASH WRITE ERROR IN SM!

can any one mode the bios for me. so that i can flash the splash screen without any errors ...i will really be thankful

my laptop details

hp Pavilion g4 1304AU
Machine name: HP-LAPTOP
Operating System: Windows 8 Pro 32-bit (6.2, Build 9200) 9200.win8_gdr.130306-1502)
Language: English (Regional Setting: English)
System Manufacturer: Hewlett-Packard
System Model: HP Pavilion g4 Notebook PC
BIOS: InsydeH2O Version CCB.03.61.31F.62
Processor: AMD A4-3330MX APU with Radeon™ HD Graphics (2 CPUs), ~2.2GHz
Memory: 2048MB RAM
Available OS Memory: 1514MB RAM
Page File: 1311MB used, 1929MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11

this is the original bios which i can flash with any errors
http://www.mediafire.com/?pgjy534594to854

insyde flasher that i use
http://www.mediafire.com/download.php?vua3e9fn6y65bmj

you can use any splash screen for this
http://www.mediafire.com/download.php?5zmf4rme5hrusir

i am really thankful to every one for the help

hope to get some solution soon

[litan1106]

I got that error too, but it didn't brick my laptop. I couldn't flashit in dos either. it restarted during the process in dos.

[Amy15]

hi i got hp laptop from state government.
when i boot in i get the splash screen of the polticians. i want to change it tried a lot but of no success.
i update the bios using the softpaq it is here ftp://ftp.hp.com/pub/softpaq/sp65501-66000/sp65659.html
i updated the bios but of no use
my laptop model is HP Pavilion g series g4-1303 au
OS Name Microsoft Windows 8 Pro
Version 6.2.9200 Build 9200
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name UPLC
System Manufacturer Hewlett-Packard
System Model HP Pavilion g4 Notebook PC
System Type x64-based PC
System SKU D7Z60PC#ACJ
Processor AMD A4-3330MX APU with Radeon™ HD Graphics, 2200 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date Insyde F.6D, 1/24/2014
SMBIOS Version 2.7
Embedded Controller Version 33.71
BIOS Mode Legacy
BaseBoard Manufacturer Hewlett-Packard
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Mobile
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale United States
Hardware Abstraction Layer Version = "6.2.9200.16384"
User Name UPLC\Amit
Time Zone India Standard Time
Installed Physical Memory (RAM) 2.00 GB
Total Physical Memory 1.48 GB
Available Physical Memory 239 MB
Total Virtual Memory 2.98 GB
Available Virtual Memory 1.35 GB
Page File Space 1.50 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions Yes
Hyper-V - Second Level Address Translation Extensions Yes
Hyper-V - Virtualization Enabled in Firmware Yes
Hyper-V - Data Execution Protection Yes

Also i don't know whether my laptop is RSA signed. but i found RSA.SIG file in the bios setup which i downloaded
Please help me out

[Ssnshivaji]

Any solution?

[1234s282]

I would have thought that installing the original HP bios update from the HP website would remove the logo and restore the default HP one.

If you're just trying to remove the custom logo that the previous owner has put in , this should disappear by installing the official HP BIOS Update without any further modification.

Or are you still wanting a customized splash screen but with a different image?