![[-]](https://www.bios-mods.com/forum/images/black/collapse.png "[-]")
11-04-2012, 11:04 PM
Hello I am hoping to find some help with something I've been trying to do for some time and that is increase the max imc voltage on this board the max available is 1.2 volts.
The first thing I was looking into was pencil mod but never found anything.
So after investigating I found the P7H55-M has a much finer imc voltage adjustment as with all other boards in the series, it looks to me that the board layout is almost identical other than the PATA, Lan controller and lack of DVI on the non pro. I messed around with AMIBCP to see if I could change anything and everything was near the same, If you were to change the option rom in the bios with MMtool would you be able to force flash the P7H55-M bios?
Also if I were to do this what are the chances I would be able to recover with Crash Free Bios 3 if it doesn't post.
The first thing I was looking into was pencil mod but never found anything.
So after investigating I found the P7H55-M has a much finer imc voltage adjustment as with all other boards in the series, it looks to me that the board layout is almost identical other than the PATA, Lan controller and lack of DVI on the non pro. I messed around with AMIBCP to see if I could change anything and everything was near the same, If you were to change the option rom in the bios with MMtool would you be able to force flash the P7H55-M bios?
Also if I were to do this what are the chances I would be able to recover with Crash Free Bios 3 if it doesn't post.
![[Valid RSS]](valid-rss.png "Validate my RSS feed")