[PAYING][REQUEST] HP Envy x360 Ryzen IOMMU/AMD-Vi

[Nights]

Hi,  I found out that my AMI BIOS is an insyde BIOS. I have bought a new HP Envy x360 15-bq108ca with a Ryzen 5 2500U CPU. I only need IOMMU ( AMD-Vi ) & RVI if there is an option. I'm not sure if these would be under advanced tab in the BIOS. I will pay for working IOMMU BIOS on my laptop.

My BIOS firmware is as follows: AMI F.13, 2017-11-10

You may get a link for the bios here: Main Driver Page
or a direct link: Direct Link

Also, I dumped my bios.rom using a utility. Here is a link for it: Bios.rom

Thanks! I hope that you can help =)
- Nights.

[gsoul5005]

Link to modded BIOS version F19 rev A with advanced and Chipset menu unlocked:

https://ufile.io/t0ze7

Flash using AFU
Link to AFU DOS: https://ufile.io/2n7u8

Create Bootable USb using: https://ufile.io/4k8l6

• As the bios modding made it to loose its signature, it can not be flashed any more with EZ Flash, but flashing it remains as safe and almost as easy:
  
  
• Start HP USB Disk Storage Format Tool.
  
• Select an USB stick.
  
• Warning: All content will be erased so make backup of its files if necessary.
  
  
• "File system" has to be "FAT32".
  
• Check "Quick Format" and "Create a DOS startup disk".
  
• Select the "usbdos" directory then click "Start" to format the stick.
  
• Copy AFUDOS.exe and the modded bios (.rom)/(.bin) on the stick.
  
• Reboot and enter the bios setup to load the default settings by typing F5.
  
• Reboot on the USB stick by typing F8 before the POST to access the boot override menu.
  
• When a command prompt appears, type "AFUDOS yourmodded.bin /GAN".
  
• Take the time to check your typing before you hit Enter.
  
• The flash process takes several minutes. It ends on a command prompt.
  

The F19 version BIOS has issues with OLD gpu drivers from 2017. Be sure to update the GPU drivers (Force install newer drivers if needed) before flashing.

[popoyaya]

Doesn't work. AFUDOS gives error: "Error: Problem getting flash information."