[REQUEST] Asus ROG G75VW BIOS Unlock

[genius239]

@dolmen3
Try this tool package to make a unlock bios of G75VW for your machine.

[dolmen3]

Thanks Genius239.

Dumps bios => ok
Replace files => ok
Flash mod bios => ok

Reboot, hit F2, activate Hotplug save and exit, reboot.

I have logo asus, backlight of keyboard and after black screen and backlight keyboard off.

Semi Brick?

[genius239]

@dolmen3
This tool package only menu unlock ,it impossible cause the brick as long as the laptop model and bios version were the same with i modified .
In fact you can see the unlocked item ,right?? It no any problems.
It caused from you set up "Hotplug" in bios ,it cause by your settings ,it didn't related with unlock bios.

Why do you to set Hotplug up?? I don't think it can help out the extrenal eGPU device any ,you should comsider boot type ,i mean uefi or legacy..etc.

[dolmen3]

I will set hotplug up to try to resolve the freeze startup. When i swap my old 9600gt with my HD7970 everything is ok but freeze after reboot. i will try activate hotplug starting windows plug my HD7970 and no need my 9600GT.
It doesnt matter for the brick, i will try to reflash bios with ch341a, i like challenge
There is a lot of post with brick G75VW after reload setting bios in version 223.
I'm curious, wich module have you modify to unlock all the bios?

[genius239]

You don't need use ch341a to revert it ,you can rename first backup dump.rom to mod.rom ,then re-flash it again.

You mention that there a lots bricked cases with g75vw in bios version 223 ,so it is a common flaw in this version?
Do you consider to flash other bios version?

[dolmen3]

Maybe there is a common flaw in this version, i dont know, there is no update after this version.
Maybe reflash with version .210. In 9 years i had no problem with this version.
I have upgrade in 223 for my egpu.
I will flash with ch341a because i have trying cmos and reflash with G75VWAS.223 at startup with key CTRL + Home. the laptop doesnt launch EZ flash.
And when the laptop boot i dont have access to the bios. Hit F2 or escape nothing.

[genius239]

I mean you can use flash.bat to flash original bios dump(dump.rom) to revert , you only need to rename it to mod.rom.

[dolmen3]

I can't boot into windows and i have no acces to the bios to flash....

[genius239]

Ok! i see.

[dolmen3]

Maybe you have another way to reflash with the dump at startup.