[REQUEST] Asus ROG GL502VSK (Kaby Lake) BIOS Unlock

[Lost_N_BIOS]

Thanks, no dice there All incomplete and extremely limited for the ones that did give a few settings

Please test these BIOS, flash via FPT, do you see two advanced now with either
http://s000.tinyupload.com/index.php?fil...3688533407

FPTw.exe -BIOS -f biosregdumpM2.bin

FPTw.exe -BIOS -f biosregdumpM3.bin

If not, I'm sorry but I might not be able to get this sorted out for you
I can however, help you to change any setting you find in this file, without modifications to the BIOS / no flashing required
Settings are in order that you see shown in AMIBCP usually, if it helps you scroll/look around
http://s000.tinyupload.com/index.php?fil...9044363675

[BuP4uk]

Thanks, no dice there  All incomplete and extremely limited for the ones that did give a few settings

Please test these BIOS, flash via FPT, do you see two advanced now with either
http://s000.tinyupload.com/index.php?fil...3688533407

FPTw.exe -BIOS -f biosregdumpM2.bin

FPTw.exe -BIOS -f biosregdumpM3.bin

If not, I'm sorry but I might not be able to get this sorted out for you
I can however, help you to change any setting you find in this file, without modifications to the BIOS / no flashing required
Settings are in order that you see shown in AMIBCP usually, if it helps you scroll/look around
http://s000.tinyupload.com/index.php?fil...9044363675

still unchanged, but I was able to disable hyper-threading via grub by setting setup_var 0x4B7 0x0
oooh yes, I finally plugged the high-frequency squeak of the processor by disabling c-state and voltage optimization via grub, this is already a great happiness for me.
how i can undervolt my cpu from bios?

[Lost_N_BIOS]

Well that's no good! Go ahead and reflash stock BIOS that way all these failed edits are not in your BIOS possibly causing bugs/stalls later on. Then do your HT edit again.

Let me get back to you on the voltage adjustment, I am helping another user with exact same type BIOS settings you have do this very thing over here, lets see the outcome and then I can help you do via grub the same
https://www.win-raid.com/t4094f16-AMIBCP...anged.html

[BuP4uk]

Anyone have idea how to undervolt cpu?

[RealGM]

Thanks, no dice there  All incomplete and extremely limited for the ones that did give a few settings

Please test these BIOS, flash via FPT, do you see two advanced now with either
http://s000.tinyupload.com/index.php?fil...3688533407

FPTw.exe -BIOS -f biosregdumpM2.bin

FPTw.exe -BIOS -f biosregdumpM3.bin

If not, I'm sorry but I might not be able to get this sorted out for you
I can however, help you to change any setting you find in this file, without modifications to the BIOS / no flashing required
Settings are in order that you see shown in AMIBCP usually, if it helps you scroll/look around
http://s000.tinyupload.com/index.php?fil...9044363675

I took a risk and try it on my own GL502VSK. I think you are on to something because a "Graphics Configuration" suddenly popped up and and selectable option "DVMT Pre-Allocated" appears. Although only this option is new from your .bin. 

However, this option is not useful for our laptop as Intel Graphics is disabled on our laptop in favor of G-Sync. 

Anyways, thanks for your attempt. At least now I learn how to use grub to change some settings.

[Lost_N_BIOS]

Yes, I only enabled a few things at the very root level, to see which if any new main sections would appear (Like chipset, second Advanced etc).

Which section is graphics configuration located in for you now? Sorry, don't have time to dig up BIOS folder and check, so thought I'd ask you instead since that's quicker for me right now

[BuP4uk]

Thanks, no dice there  All incomplete and extremely limited for the ones that did give a few settings

Please test these BIOS, flash via FPT, do you see two advanced now with either
http://s000.tinyupload.com/index.php?fil...3688533407

FPTw.exe -BIOS -f biosregdumpM2.bin

FPTw.exe -BIOS -f biosregdumpM3.bin

If not, I'm sorry but I might not be able to get this sorted out for you
I can however, help you to change any setting you find in this file, without modifications to the BIOS / no flashing required
Settings are in order that you see shown in AMIBCP usually, if it helps you scroll/look around
http://s000.tinyupload.com/index.php?fil...9044363675

I took a risk and try it on my own GL502VSK. I think you are on to something because a "Graphics Configuration" suddenly popped up and and selectable option "DVMT Pre-Allocated" appears. Although only this option is new from your .bin. 

However, this option is not useful for our laptop as Intel Graphics is disabled on our laptop in favor of G-Sync. 

Anyways, thanks for your attempt. At least now I learn how to use grub to change some settings.

how u flash bios ?

[Lost_N_BIOS]

Instructions (Command to flash) are right there in the quote, with Intel FPT

[BuP4uk]

Instructions (Command to flash) are right there in the quote, with Intel FPT

I just thought that he used a different method, because I have everything intact.

[RealGM]

Yes, I only enabled a few things at the very root level, to see which if any new main sections would appear (Like chipset, second Advanced etc).

Which section is graphics configuration located in for you now?  Sorry, don't have time to dig up BIOS folder and check, so thought I'd ask you instead since that's quicker for me right now

Hi There, it was shown under "Advanced". 

And yeah, I flashed it with the described method. 

I was planning to [censored] around with a flash programmer and SOIC8 clip but somehow the pins don't match up with my clip.