[REQUEST] Asus TUF FX506LI full unlock

[peturb]

Hi. On computer when configuration is bad you can open it and get out clear cmos battery. But on asus tuf fx506lh there is no battery clear cmos. Do you know how to reset it to default modded bios.

[genius239]

@peturb

If you mean is do clear cmos ,i know a way.
First turn off the laptop ,then turn on the machine and hold on power button more than one minute ,then lose hold of your hand and turn on the laptop again.
(I don't know whether there is cmos battery on this laptop ,you could attempt to find it.)

If you mean is revert to original bios ,there two ways.
1) Rename original dump.rom to mod.rom ,then flash this file by i provided guide again ,like you flash the mod at the same steps.
2) Update asus official bios.

[peturb]

Still dont work. I rry with ac connected and without ac wait more rhan 1.02 min and again on laptop black screen. I tey open it and there is no battery maybe it is behind keyboard but this mean it need to dissamble all laptop and it will be mess.

[genius239]

@peturb

So ,what do you set up in bios then cause this?? something you did?
If it can't clear cmos ,why don't you try to re-flash to original dump bios??

[peturb]

Just auto graphic i like to use nvidia and not intel. In bios i try seek for legacy biod too and it dont exist. I like your mod. [censored] off origonal bios. Strange is how it is possible without bios.

[genius239]

There should only GeForce GTX 1650 Ti video output on this laptop ,no design lanes for intel uhd graphic.
Or you can see the intel hd graphic in device manager? I only can see the GTX 1650 on fx506li's specification ,no intel uhd graphic included.

Do you set "Primary Display" to auto?

===============
I think it should has a cmos battery on the motherboard , you just didn't find it yet. You may spend a while to find it.

Below is some samples for clear cmos in asus laptop that you could refer.
https://www.youtube.com/watch?v=JhhoXIVkULE
https://www.youtube.com/watch?v=jQZHgdCuzGE

[peturb]

Hi it is fx506lh. I put ut on auto. And it onlt detect hdmi on nvidia when it is in windows 10. I n bios it is black screen on two monitor. And internal laptop monitor is all time black. I try flash original bios with your peogram and it comment prorected. It cant enter in frub becouse hdmi dont work untilwindows 10 is start. I open it and there is no battery. What is not open is behind keyboars the open side. Bur need to remove all cables and sceews it is fear becouse maybe it wont put rhing correctly. I need go walk when return home i will make livestream maybe some three hours after if you are here i will show without hdmi laptop screen is black. And with hdmi it start when windows 10 is start. When try with your program flash original bios it comment it is protected fpm and i need grub to put you know what but there is no screen.

[genius239]

fx506lh is used GeForce GTX 1650 ,i also can't see the intel hd graphic is included in the specification table.

Try rename original dump.rom to mod.rom ,then directly run flash.bat as administrator to reflash without do grub variable. Test if it can be flash.

I need going to sleep ,i'll off line later.

[peturb]

It dont work. Cant post pohotos. It comment fpt operation failed. It is included

[peturb]

https://peertube.bgzashtita.es/w/7tgUBpvBWtuSbnBFZJzj8p