[REQUEST] Lenovo G510 (79CNxxWW) Whitelist Removal

[rumunn95]

i tried flash it into cmd and sleep bug but give me :
Error 7: Hardware sequencing failed. Make sure that you have access to target fl
ash area!

[3rav]

Hi BDMaster i want remove whitelist in my bios on Lenovo G510.
This is my backup:


http://rghost.net/79DFPQrRQ

Regards

[Oleh]

Hi BDMaster i want remove whitelist in my bios on Lenovo G510.
This is my backup:


http://rghost.net/79DFPQrRQ

Regards

http://rghost.ru/7rNssC7pz
read Private Messages

[3rav]

Hi BDMaster i want remove whitelist in my bios on Lenovo G510.
This is my backup:


http://rghost.net/79DFPQrRQ

Regards

http://rghost.ru/7rNssC7pz
read Private Messages

Hi,

The Backup Tools shows me the error : Error 280 = EEPROM Write Protect .

The described method will work despite the error?

If you use a programmer which specifically is to upload files from an archive that sent me?

Regards
Rafal

[Oleh]

try .... if you have any difficulties, will address

[jefediego]

I am sorry but there aren't so only using an SPI Programmer is possible this job !
Look here :

https://www.bios-mods.com/forum/Thread-R...5#pid74575

regrads

So, if I buy the SPI Programmer and follow the guide, I'll be able to use another wifi card, etc... ?
Just need to buy that and the modded bios!

[BDMaster]

I will help to make this job !
Regards

[3rav]

Hi all,

I'm going to buy CH431A programmer (http://allegro.pl/programator-ch341a-24x...05896.html), but not in the list of supported my bios chip number. Please let us know whether this programmer will work with the BIOS chip.

Chip bios:
25R064A
13ECO
99 CHN
350018



Regards

[BDMaster]

Witamy przyjaciela !!!
Your choice is Super !
Regards

[3rav]

Witamy przyjaciela !!!
Your choice is Super !
Regards

Witam,
Hello,

I made an attempt to upload the modified BIOS by using the programmer CH341A, but the attempt failed:
 
1.     The programmer mistakenly recognized my chip detects it as a chip “128bit” instead of 8MB.
2.     I changed in the program to the chip COMMON 25X64.
3.     I made a backup of BIOS loaded.
4.     I programmed the chip with modified bios.
5.     Computer after step 4 did not start.
6.     I programmed the BIOS with my backup (created in step 3. - from the programmer).
7.     The computer is normally launched.

I am attaching my backup BIOS (programmer).
http://rghost.net/85QMgZ4V4

 
Please warmly about some advice.

Regards
Rafał