[REQUEST] Unlock pcie settints to noname motherboard

[grec]

Hi, guys!

I have maining motherboard. I want check opportunity to start at it pcie 3.0. I sugges that it has h110 or h170 chipset (based on capacity location). I made bios dump and open it in amibcp 5.02. And a'm change some access/use level field to User


 



After write programm, I didn't see unlocked menu A'm sure that i write rom right, because
I was able to open other submenu (OverCloking Performance in Advenced). 

How unlock chipset and PCI Settings menu?

[grec]

So, I found PCI subsystem settings link in Advanced interface and it show in my bios, but here has't option to choose version of pcie. Someone know how enable gen 3 driver in ami bios?

Perhaps bus was commutated to support only gen 2 and gen 1. It neccesary check too

[Lost_N_BIOS]

No one can help without a link to your BIOS. Check your main BIOS page, do you see access level at the bottom, if yes what does it show, user or Admin?

I may be able to unlock all the BIOS for you, but need a copy of your BIOS install package, or a BIOS dump, before I can check to let you know. If this is an Intel system, then do this >> Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version.
Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
https://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html

Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder. Select that Win folder, hold shift and press right click, choose open command window here (Not power shell).
At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin

If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges

[grec]

No one can help without a link to your BIOS.  Check your main BIOS page, do you see access level at the bottom, if yes what does it show, user or Admin?

I may be able to unlock all the BIOS for you, but need a copy of your BIOS install package, or a BIOS dump, before I can check to let you know.  If this is an Intel system, then do this >> Check BIOS main page and see if ME FW version is shown, if not then download HWINFO64 and on the large window on left side, expand motherboard and find ME area, inside that get the ME Firmware version.  
Once you have that, go to this thread and in the section "C" download the matching ME System Tools Package (ie if ME FW version = 10.x get V10 package, if 9.0-9.1 get V9.1 package, if 9.5 or above get V9.5 package etc)
https://www.win-raid.com/t596f39-Intel-Management-Engine-Drivers-Firmware-amp-System-Tools.html

Once downloaded, inside you will find Flash Programming Tool folder, and inside that a Windows or Win/Win32 folder.  Select that Win folder, hold shift and press right click, choose open command window here (Not power shell).  
At the command prompt type the following command and send me the created file to modify >> FPTw.exe -bios -d biosreg.bin

If you are stuck on Win10 and cannot easily get command prompt, and method I mentioned above does not work for you, here is some links that should help
Or, copy all contents from the Flash Programming Tool \ DOS folder to the root of a USB Bootable disk and do the dump from DOS (FPT.exe -bios -d biosreg.bin)
https://www.windowscentral.com/how-add-c...ors-update
https://www.windowscentral.com/add-open-...windows-10
https://www.laptopmag.com/articles/open-...privileges

I made bios dump. At the moment I try run pcie gen 3 at this board.

[Lost_N_BIOS]

Thanks, I will check tonight and get back to you. I need to know this answer >> Check your main BIOS page, do you see access level at the bottom, if yes what does it show, user or Admin?

[grec]

Thanks, I will check tonight and get back to you.  I need to know this answer >> Check your main BIOS page, do you see access level at the bottom, if yes what does it show, user or Admin?

No, access level didn't showed in main page.


P.S
user genius239 made modifacation to me
all thanks

[Lost_N_BIOS]

So all sorted out now then? If so, thank you genius239!