[REQUEST] Whitelist removal HP Probook 6550b

[BDMaster]

Ok mate,
So the good file is the 1st ROM.bin and Eeprom Chip which is ?
Let me know
Regards

P.S. For me ROM.bin is good

[BDMaster]

Try this one :

http://rghost.net/7WClpFss5

let me know
Regards

P.S. Donate to me . . . look into my Signature
I have rebuilded all Bios Region !

[zondajag]

Hi I found out the eeprom chip is the SST25VF032B/PCT25VF032B (apparently these are the same). Did you mod the most recent ROM.bin I uploaded? What do you mean by "rebuilded all BIOS Region"?

I'll flash the ROM when I get back later. fpa do you want to try reflashing with my backup or did you give up a while ago?

[BDMaster]

Hi mate You're right are same Chips !
I wrote Rebuilded Bios Region as into your firrmware file something seems to be wrong !
So I downloaded the sp67215 version to extract the 68CDE Bios and used for your Firmware
and replaced It into your file !
Now could be that your laptop hasn't all DMI Data but It's not a problem as I will replace
after testing the Firmware Patched I sent You !
Let me know
Regards

P.S. anyway You can rewrite back your Firmware Dump You made !

[zondajag]

Looks like it didn't work. I'll try flashing the backup and seeing if I can revert the changes.
http://imgur.com/37spMDJ,KI43VWD

Update: Flashing the backup has got it working again. Can you try modding the backup for me again?

[BDMaster]

Hi mate,
It's only an alert as are missing your DMI Data (I said) You have to press Enter to continue
Startup !!!
I said that after looking It working I will replaced your DMI Data correcting all !
It will work anyway without DMI Data too !
Let me know
Regards

P.S. don't be afraid

[zondajag]

I have updated my previous post. I tried booting into windows with the modified ROM and the laptop switched off. Tried turning it on again and got the same screens. It started booting but the video ended up going to static.
I reverted to the backup and all I needed to do after the first boot attempt was to reboot to refresh the CMOS.
I had display issues with the modified firmware (white noise display). Any chance you could see if the modified firmware can be fixed?

[BDMaster]

Yes mate !
I wanted to know if at Boot step Laptop could be stopped by RSA Error like before
the Mod !
So You are saying that It started to Windows and then manifested the issue ?
I think You are using Win10 (real black beast) ?
Let me know more infos please as I have understand well !
Now I will prepare a Firmware Patched replacing your DMI Data to avoid this issue !
And I will give a look for the vBios used into your Original Firmware too !
Regards

[zondajag]

It started to windows 10 and then the screen went to static. I'm thinking the vbios might have gone wrong in the modification perhaps.

[BDMaster]

I will rebuild It too !
But strange is that You flashed again your Firmware Dump overwriting
all previous ?!?
Regards