[Request] Acer 9810 Notebook Bios Unlock with experienced user

[Akirax3]

My Request was forgotten

[adozid12]

hhhhhhhhhhhh

[Sml6397]

Hello Akirax3,

Your BIOS mod is complete! The modified BIOS image can be found at the bottom of this post.

I have added the Intel VT-x setting to the Main Menu.

Generic Warnings/Disclaimers:

Please remember to take proper precautions when flashing your BIOS. Even if the BIOS image is safe, the flashing process can still fail. Make sure that [if applicable] your notebook is fully charged (100%), that the power adapter is properly connected, and that the chance of a power outage occurring is as minimal as possible. Do not interrupt the flashing process. If possible, it is a good idea to have a working CRISIS recovery disk handy when flashing your BIOS. Use the flashing instructions for your particular computer brand. DO NOT DO ANYTHING UNNECESSARY!!!

I take absolutely NO responsibility for ANY damages that may occur to you, your computer, your personal belongings, your neighbor's cat, or any other personnel or equipment as a direct or indirect result or consequence of your, or any one else's, use or misuse of any of the files that are in this archive at the present or at any time in the past or the future. You assume full responsibility for any damages or inconveniences that may occur by choosing to flash, or otherwise use or misuse, this image or any of the other files within this archive.

Have fun!

Please remember to post the results of the BIOS flash! Pictures are especially appreciated.

HASH VERIFICATION (DigitalVolcano's HashTool v1.1):
MDA5: [coming momentarily]
SHA-1: [coming momentarily]

[Akirax3]

Flashing worked like a Charm with "phlash16.exe /c /v /s /x biosname.rom"
Here are the Screens:





But sadly its NOT fixing the Installation Process of Windows 8/8.1/10 with 4 GB Ram installed.
Its only possible with 3GB Ram.

And the VT Technology feature doesn't seem to work/speed up Bluestacks or any other Emulator


But thanks for your hard work and your help !
Thank you very much !

[Sml6397]

Hello Akirax3,

The VT-x setting requires a power cycle to take true effect. Set the setting from whatever the current option is to "enabled" and then shut down the PC. Boot the PC up again. VT-x will now be enabled. The performance difference can range from negligible to noticeable. Enabling the hardware VT-x feature will, however, give your machine increased compatibility with certain virtualized applications.

~Steven