[Request] Asus M2N-CM DVI

[Varsius]

Hello,
I need a custom BIOS for the ASUS M2N-CM DVI Motherboard with an option to disable Chassis Intrusion.
I tried to open up the BIOS myself with AMIBCP v3.46 but I am completely new to bios modding and did not
find a way to disable chassis intrusion.

It would be really great if someone could make me a bios with an option to disable Chassis Intrusion
Thanks for your help!
Valentin

Latest BIOS: https://www.asus.com/de/Motherboards/M2N...Desk_BIOS/

PS: If you want to know:
I have an old motherboard but it shows "Chassis Intrusion Fatal error System halted" when I try to boot.
I have this problem for several weeks and trust me I tried everything! Resetting CMOS does not help, I looked
at the manual a hundred times and all the jumpers are correct and I tried several ones and I googled nearly every thread
that has something to do with chassis intrusion but all of this did not work. Unfortunately, there is
no option in the BIOS to turn of chassis intrusion or to ignore boot errors.

[LLC]

Hi, it's not a software problem. You need to clean the from dirt the Multicontroller. If superio is ITE8712(find and read datasheet) check voltage on pin 68(COPEN#(Case Open Detection #), power from VCCH or VBAT(The Case Open Detection is connected to a specially designed low power CMOS flip-flop backed by the battery).