[Request] ECS RC410L/800-M (V2.0) / Packard Bell Istar 1269

[bummm]

Hi, 

Could you please unlock hidden options? 

Thanks!
B.

[LLC]

You can try it yourself.
   

[bummm]

Thanks,
Does anybody know why DRAM Frequency shows 266? This motherbord sholud be with 800 MHZ. Is it possible to change it? Or DRAM frequency changes by his self when its needed? I'm confused.

Tanks!
B.

[LLC]

Because it read internal chipset register setting(0-0-1 reg 9C bit2-0) and convert it in this understanding value.
On site ECS written, FSB 800/533MHz, DDR2 667/533/400. Perhaps 266 mean 266*2=533.
On picture FSB: 133(real)*4=533(effective), RAM 200(real) because used DDR1 type memory on that mobo.  I don't know all ratios FSB/RAM is allowed for RC410 chipset and limited the their using onboard video, and your fsb cpu and memory modules performance(PC xxxx) to answer your quation.

[DeathBringer]

Does anybody know why DRAM Frequency shows 266? This motherbord sholud be with 800 MHZ.

I think that you have CPU with FSB=533 Mhz.

[bummm]

Does anybody know why DRAM Frequency shows 266? This motherbord sholud be with 800 MHZ.

I think that you have CPU with FSB=533 Mhz.

I have Pentium d 945: http://www.cpu-world.com/CPUs/Pentium_D/...945R).html 

Frequency 3400 MHz
Bus speed  800 MHz
Clock multiplier 17

..so I'm not sure how it works.

[LLC]

Ok. what about marking on memory modules ? or SPD information from CPUZ utility ?

[bummm]

Thanks for help !
It seems that Packard Bell Istar 1269 is not the RC410lM2 ( ECS RC410L/800-M (V2.0) ) but RC410M v2.0 , more something like this: https://support.hp.com/ee-en/document/c00783614  . Its seems that it's cheaper combination of parts. The memory bus speed is only 533Mhz. Do you think if I will install BIOS from ECS RC410L/800-M (V2.0)  - it will change the memory bus speed to 667 MHz ?

Thanks!
B.

[LLC]

I don't know this specific things, usually letter in name of chipset, must mean some difference.

[bummm]

...SO... I flashed bios from ECS RC410L/800-M (V2.0) and it doesn't start at all .. no bios, no nothing.. only fan is working ..(I remember that I thicked all 4 options in AMI aplication) Any ideas what to do? I have backup of old BIOS, but now it doesnt start from pendrive.