11-02-2026, 03:15 PM
(10-17-2018, 10:17 PM)Lost_N_BIOS Wrote: See, your first sentence does not make sense to me. That should not be required, either UHD 360 or your Nvidia card both work with Win7, with either enabled, either disabled, both enabled. So you should be having to do this graphics related stuff you are doing, something else is causing issue and just leading you to think it's this. I do see there is driver issues to use UHD 630 with win8, but you can get around that and still install them. But, you want UHD disabled anyway, so we can do that in the BIOS, either by disable internal graphics setting, or switch primary adapter setting from SG to PCIE
Flash BIOS using stock official flash tools, modify batch file to name of your BIOS mod, or rename mod BIOS to match the BIOS name used in the stock flasher = problem solved.
Win7, can be ran on UEFI mode (Secure boot enabled, GPT partition used), or CMS/Legacy mode with secure boot disabled and MBR or GPT partition
on PS/2, is there two PS/2 ports, and you only want to disable one? If yes, sorry I probably cannot figure out how to only disable one port. Leaving both enabled has no effect, I mean it shouldn't cause you any issues, shouldn't even notice it's enabled.
On #12 again, maybe you can save profiles in your BIOS, I don't know. Check on exit page, there is usually "save profile as" when you can save/load BIOS profiles. Then you can set however you want all settings, save, and then make other changes to another profile and save that one with different name. No, there is no other "Easy button/switch to enable/disable many settings at once for certain way to run, only profiles like you mentioned can do that.
So glad you saved $$ and didn't pay company to recover your board, programmers are so cheap I hate seeing when someone didn't sped $3-8 and then send off system for RMA and end up paying big buck$$
Please flash back stock BIOS, and get me the BIOS images I asked about, then I can work on chipset for you. Without those images, I cannot try to enable
Hello from the future
may I ask for the same help but with Clevo N870HK1? Got it's win10 BSODed again while 1.05.22TDES BIOS flash sequence and now it bricked. At least I got dumpfile after the first failed attempt of BIOS update (not actually an update since it had the same BIOS version but damaged as I assume from constant and random BSODs reffering power and nvidia drivers).





